Adomast manufacture a wide range of formwork release agents to suit every type of construction casting. Our mould release agents cover all aspects of concrete casting from traditional mould release oils to the latest in emulsion technology. We have enhanced this further with the addition of environmentally safe biodegradable options.
Each mould release agent has been designed to give reliable and repeatable high performance with all types of formwork, providing quick, clean and easy release properties with a concrete surface finish that is sharp, uniform, non-stained with minimum defects.
We also manufacture and supply a premium range of formwork treatment auxiliaries including weather resistant formwork sealing compounds, jointing tapes, and corrosion protective wax treatments.
Showing 1–9 of 21 results
-
Adofill
Read More +Two Part Polyester Resin Compound for Formwork Face Repair
Adofill is a twin pack polyester resin. Designed to be rapid setting with physical and chemical properties which make it ideal for the repair of surface damage and irregularities on most types of formwork in common use.
It is simple to mix and apply, Adofill has excellent adhesive properties to most surfaces.
Once set the compound is easy to sand and smooth.
The final set resin is resistant to water, oil and alkali chemicals.
Size (available in) - 1.2Kg
- 5Kg
- 8Kg
Coverage 2m2 @ 1mm per 5Kgs of Adofill -
Adolease
Read More +General Purpose Mould Release Oil
Adolease is designed for everyday site use.
It is a low viscosity, readily applied mineral oil based mould release agent.
Designed to give reliable high performance with all types of formwork.
Adolease forms a physical barrier between the formwork and the concrete giving a quick, clean and easy release with minimum blowhole formation & providing a sharp, uniform and non-stained concrete surface.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Adoseal
Read More +Polyurethane Based Formwork Face / Surface Sealer
Adoseal is a low viscosity, low VOC, easy to use high solids, single pack moisture cured polyurethane coating.
Designed to impart a high quality, fully impervious surface lacquer finish to formwork and other porous surfaces.
This tough flexible sealing coating increases formwork life considerably. It improves concrete appearance by preventing staining from wood faced formwork.
It also improves formwork release and helps cut back on formwork cleaning time. It is easily applied by spray or brush and touch dries very quickly.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 7-9m2 per litre -
Adoseal LS (Light Stable)
Read More +Polyurethane Based Formwork Face / Surface Sealer
Adoseal LS is a high performance aliphatic polyurethane resin developed for sealing and protecting porous surfaces. It is a solvent based gloss sealer that has excellent non-yellowing characteristics which means it can be used outdoors. Once dried and cred it creates a highly durable wear layer which is colour free and fully transparent and tack free.
It is a high solids but low viscosity resin which makes it easy to apply. We recommended two coats for most application. A slightly thinned down first coat to ensure full absorption into the substrate and than a second coat as supplied, applied on top. The resulting coating offers a very good water and stain
resistance.Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 5m²/litre depending upon surface porosity -
Adoseal WB (Water Based)
Read More +Adoseal WB
Formwork surface & exposed edge protective sealer
High performance aqueous Polyurethane solution for Sealing Plywood
Surfaces & exposed Edge Protective SealerIt also improves formwork release and helps cut back on formwork cleaning time. It is easily applied by spray or brush and touch dries very quickly.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 7-9m2 per litre -
Adoshield Premium
Read More +Wax Based Coating Solution for Corrosion Protection in Concrete Plant & Formwork
Adoshield Premium is a special blend of corrosion inhibiting agents and petroleum distillates developed to be easy to use, apply and offers maximum protection to metal surfaces where prolonged storage or shipping is envisaged.
Due to the careful selection of waxes within the formulation, the degree of coating adhesion to the surface is excellent.
The advantage is the coating is not readily removed or rubbed away if the plant or formwork is moved or bumped.
Adoshield Premium is non-acidic and is suitable for use on all surfaces.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 10-12m2 per litre -
Adostrike
Read More +High Oil Content Solvent Based Mould Oil
Designed for general site and precast use, Adostrike is a higher concentration of mould release chemicals blended together to achieve the highest quality concrete finish.
Adostrike is a premium quality mould oil that offers excellent release characteristics.
It has low sag qualities which allows application long in advance of casting without loss in release performance or quality of finish.
Suitable for use on all types of formwork, even on sealed or unsealed timber in all climatic conditions.
It is highly resistant to removal by rain showers or foot traffic.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Adostrip
Read More +General Purpose Mould Release Oil
Designed for everyday site use, Adostrip is a highly efficient yet cost effective mould release agent, offering excellent coverage rates.
It forms a physical barrier between the formwork and the concrete giving a quick, clean and easy release with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 40-50m2 per litre -
Adostrip DC
Read More +Mould Release Agent for DRY CASTING Processes
Adostrip DC is a blend of the latest surfactant chemistry, blended with traditional release oil technology to create a release agent specifically designed for dry casting operations.
The surfactant blend present within the formulation reduces the surface tension between the concrete and the formwork face allowing a quick, clean and easy release with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface.
Suitable for use on all types of formwork.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre
