Adoseal LS (Light Stable)
Polyurethane Based Formwork Face / Surface Sealer
Adoseal LS is a high performance aliphatic polyurethane resin developed for sealing and protecting porous surfaces. It is a solvent based gloss sealer that has excellent non-yellowing characteristics which means it can be used outdoors. Once dried and cred it creates a highly durable wear layer which is colour free and fully transparent and tack free.
It is a high solids but low viscosity resin which makes it easy to apply. We recommended two coats for most application. A slightly thinned down first coat to ensure full absorption into the substrate and than a second coat as supplied, applied on top. The resulting coating offers a very good water and stain
resistance.
| Size (available in) |
|
|---|---|
| Coverage | 5m²/litre depending upon surface porosity |
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.: 411
Revision No.: v1
Download Adoseal LS Data Sheet 2025
Request Safety Sheet
ADOSEAL LS is a high performance aliphatic polyurethane resin developed for sealing and protecting porous surfaces. It is a solvent based gloss sealer that has excellent non yellowing characteristics which ,mean it can be used outdoors.
- Tack free in 1.5hrs
- Foot traffic in 2hrs
- Overcoat time 24hrs
- Elongation at break 40%
- Abrasion resistance
- Good chemical resistance
Surfaces should be clean, free from dust waxes and oils.
Adoseal LS is best applied with a high quality thick pile roller.
Approx. 5m2 per litre
Keep containers sealed, store at room temperature and away from direct heat. Once open it will begin to cure and should be used within 2 days.
Storage stability of unopened drum is minimum 1 year.
ADOSEAL LS is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
Prolonged physical contact should be avoided and personal and environmental hygiene encouraged. Where contact with skin occurs, the material should be removed with soap and water. If splashes affect eyes, they should be bathed immediately with copious quantities of clean water and if discomfort persists, medical attention should be sought without delay.
See Safety Data Sheet for further information.
Additional information
| Size (available in) | 5l, 20l, 25l, 205l, IBC |
|---|---|
| Coverage | 7-9m2 per litre |
Related products
-
Extracon XS
Read More +Fast Drying Mould Release Agent
Designed for everyday site use, and on all types of formwork.
Extracon XS is a highly efficient yet cost effective mould release agent, offering excellent coverage rates.
Forming a physical barrier between the formwork and the concrete giving a quick, clean and easy release, with minimum blowhole formation and providing a sharp, uniform and nonstained concrete surface.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality due to its fast drying capability.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Adofill
Read More +Two Part Polyester Resin Compound for Formwork Face Repair
Adofill is a twin pack polyester resin. Designed to be rapid setting with physical and chemical properties which make it ideal for the repair of surface damage and irregularities on most types of formwork in common use.
It is simple to mix and apply, Adofill has excellent adhesive properties to most surfaces.
Once set the compound is easy to sand and smooth.
The final set resin is resistant to water, oil and alkali chemicals.
Size (available in) - 1.2Kg
- 5Kg
- 8Kg
Coverage 2m2 @ 1mm per 5Kgs of Adofill -
Adoseal
Read More +Polyurethane Based Formwork Face / Surface Sealer
Adoseal is a low viscosity, low VOC, easy to use high solids, single pack moisture cured polyurethane coating.
Designed to impart a high quality, fully impervious surface lacquer finish to formwork and other porous surfaces.
This tough flexible sealing coating increases formwork life considerably. It improves concrete appearance by preventing staining from wood faced formwork.
It also improves formwork release and helps cut back on formwork cleaning time. It is easily applied by spray or brush and touch dries very quickly.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 7-9m2 per litre
