Showing 10–18 of 21 results
-
Adowax
Read More +Ready to Use, Brushable Wax Protective Coating & Mould Release Agent
Adowax is a blend of mould release oil and specially selected temperature resistant waxes.
This helps with the initial seal of porous formwork and can be used as a mould release agent where the use of liquid release oil is not practical.
It is easy to apply and helps waterproof and protect formwork in all climatic conditions and when not in use.
Size (available in) - 5Kg
- 20Kg
Coverage 10-12m2 per Kilo Certified - Safe
-
Adowax Bio
Read More +Adowax Bio is a blend of mould release oils and specially selected temperature resistant waxes.
It helps with the initial seal of porous formwork and can be used as a mould release agent where the use of a liquid release oil is not practical. It is easy to apply and helps waterproof and protect formwork in all climatic conditions and when not in use. -
Deactivator Bio
Read More +Deactivator Bio is a very high performance, low viscosity chemical release agent based on a blend of fatty acids dispersed in a vegetable oil base. It can also be used to prevent concrete build up on plant and machinery via the formation of calcium soaps which oct as a barrier protective
-
Extracon Bio
Read More +Fully Biodegradable Mould Release Agent
A low viscosity blend of natural vegetable oils designed for general site and precast use.
Easily applied and suitable for both indoor and outdoor use and can be used on all types of formwork.
It is particularly suited for white or fair faced concrete finishes.
Extracon Bio is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release giving a very high quality surface finish.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Extracon DS
Read More +High Concentration, High Performance Mould Release Agent
Extracon DS is a chemical release agent designed for general site and precast use.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Extracon DS is a safe, non-staining release oil that facilitates easy formwork release. Extracon DS is suitable for indoor and outdoor use.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Extracon XS
Read More +Fast Drying Mould Release Agent
Designed for everyday site use, and on all types of formwork.
Extracon XS is a highly efficient yet cost effective mould release agent, offering excellent coverage rates.
Forming a physical barrier between the formwork and the concrete giving a quick, clean and easy release, with minimum blowhole formation and providing a sharp, uniform and nonstained concrete surface.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality due to its fast drying capability.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Naturol CR2
Read More +High Concentration, Mould Release Agent
Naturol CR2 is a blend of natural vegetable oils designed for general site and precast use.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Naturol CR2 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release. Suitable for indoor and outdoor use.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Naturol CR3
Read More +High Concentration, Mould Release Agent
Naturol CR3 is a blend of natural vegetable oils in a new, very low odour solution to create a high performance chemical release agent for all site and precast use, especially for indoor use . It achieves a very high quality concrete finish and is suitable for all modern mould surfaces. Naturol CR3 will aid elimination of blowholes and provide a clean uniform and non-stained surface.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Naturol CR3 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release. Suitable for indoor and outdoor use.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Plastrip S
Read More +Maximum Concentration, Low-Medium Viscosity, Mould Release Oil
Plastrip S is a chemical release agent specifically formulated to give easy release of plastic and thermoplastic mould liners, providing a high quality surface finish, but is suitable for all types of formwork.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality.
Plastrip S will also offer corrosion protection to any metal surface.biodegradable and non-staining product that facilitates easy formwork release giving a very high quality surface finish.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
