Plastrip S
Maximum Concentration, Low-Medium Viscosity, Mould Release Oil
Plastrip S is a chemical release agent specifically formulated to give easy release of plastic and thermoplastic mould liners, providing a high quality surface finish, but is suitable for all types of formwork.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality.
Plastrip S will also offer corrosion protection to any metal surface.biodegradable and non-staining product that facilitates easy formwork release giving a very high quality surface finish.
| Size (available in) |
|
|---|---|
| Coverage | 30-40m2 per litre |
| Certified |
|
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.: 519
Revision No.: v2
Download Plastrip S Data Sheet 2025
Request Safety Sheet
PLASTRIP S is a chemical release agent specifically formulated to give easy release of plastic and thermoplastic mould liners, providing a high quality surface finish, but is suitable for all types of formwork. It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality.
PLASTRIP S will also offer corrosion protection to any metal surface
• Suitable for use on plastic mould liners with excellent results.
• Is a suspension and sediment free, highly mobile liquid, which can be used in very fine sprays without clogging the jets
• No unpleasant odour even when using a fine fog spray
• Very economic coverage rates can be obtained without difficulty.
• Retains its mobility at low temperatures.
• It may be applied immediately prior to casting, or treated forms may be left until apparently dry.
• PLASTRIP S may be used for metal or timber mould boxes holding the mould liner, allowing easy cleaning of all equipment.
• Can be used with either grey or white cement or concretes incorporating pigments.
• Provides quick positive release of form-liners, reducing labour costs and damage to formwork and liners.
• Drastically reduces the incidence of blowholes, surface blemishes and staining.
PLASTRIP S is ready to use and should not be diluted. It should be applied as thinly and evenly as possible for optimum performance. It can be applied to all types of formwork and mould liners by spray, fine haired brush, swab or roller. Any excess should be mopped up. For the best and most economical performance application by fine fog spray is recommended. It will not clog fine Jets even at freezing temperatures.
A recommended thin coating gives a coverage between 30 to 40m2 per litre depending upon surface porosity. Care should be taken to ensure that PLASTRIP S is applied as recommended as this will achieve optimum performance and maximum economy.
PLASTRIP S should be protected from frost and should be stored in well ventilated areas. Keep away from naked flames, electrical equipment, and food stuffs.
In excess of 12 months in sealed containers
PLASTRIP S mould release agent is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
Prolonged physical contact should be avoided and personal and environmental hygiene encouraged in common with the use of all mould release agents. Where contact with skin occurs, the material should be removed with soap and water. If splashes affect eyes, they should be bathed immediately with copious quantities of clean water and if discomfort persists medical attention should be sought without delay.
See Safety Data Sheet for further information.
Additional information
| Size (available in) | 5l, 20l, 25l, 205l, IBC |
|---|---|
| Coverage | 30-40m2 per litre |
| Certified | Eco, Safe |
Related products
-
Extracon Bio
Read More +Fully Biodegradable Mould Release Agent
A low viscosity blend of natural vegetable oils designed for general site and precast use.
Easily applied and suitable for both indoor and outdoor use and can be used on all types of formwork.
It is particularly suited for white or fair faced concrete finishes.
Extracon Bio is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release giving a very high quality surface finish.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Adostrike
Read More +High Oil Content Solvent Based Mould Oil
Designed for general site and precast use, Adostrike is a higher concentration of mould release chemicals blended together to achieve the highest quality concrete finish.
Adostrike is a premium quality mould oil that offers excellent release characteristics.
It has low sag qualities which allows application long in advance of casting without loss in release performance or quality of finish.
Suitable for use on all types of formwork, even on sealed or unsealed timber in all climatic conditions.
It is highly resistant to removal by rain showers or foot traffic.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Extracon XS
Read More +Fast Drying Mould Release Agent
Designed for everyday site use, and on all types of formwork.
Extracon XS is a highly efficient yet cost effective mould release agent, offering excellent coverage rates.
Forming a physical barrier between the formwork and the concrete giving a quick, clean and easy release, with minimum blowhole formation and providing a sharp, uniform and nonstained concrete surface.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality due to its fast drying capability.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre
