Naturol CR2
High Concentration, Mould Release Agent
Naturol CR2 is a blend of natural vegetable oils designed for general site and precast use.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Naturol CR2 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release. Suitable for indoor and outdoor use.
| Size (available in) |
|
|---|---|
| Coverage | 30-40m2 per litre |
| Certified |
|
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.: 559
Revision No.: v2
Download Naturol CR2 Data Sheet 2025
Request Safety Sheet
NATUROL CR2 is a readily biodegradable chemical release agent specially formulated to give easy release from precast moulds or formwork and provides a high quality surface finish to concrete.
• Essentially non-hazardous and biodegradable.
• Suitable for use on all types of formwork and pre-cast mould materials.
• It is a suspension and sediment free, highly mobile liquid, which can be used in very fine sprays without clogging the jets.
• There is no unpleasant odour, even when using a fine fog spray.
• Very economic coverage rates can be obtained without difficulty.
• Retains its mobility at low temperatures.
• It may be applied immediately prior to casting, or treated forms may be left until apparently dry.
• The chemical reaction promotes a uniform, matt, stain free, concrete surface with reduced incidence of blow holes and surface blemishes.
• Continued use gives progressively better results on timber formwork.
• Can be used with grey or white cement.
• Provides a quick, positive release of formwork, reducing labour costs and damage to formwork and moulds.
NATUROL CR2 is ready for use and should not be diluted. It should be applied as thinly and evenly as possible for optimum performance. It can be applied to all types of formwork by spray, fine-haired brush, swab or roller. Any excess should be mopped up. For the best and most economical performance, application by fine fog spray is recommended. It will not clog fine jets even at freezing temperatures For new ‘unsealed’ timber forms pre-treatment is recommended with a second coat applied prior to use.
A thin coating spray applied to give a coverage area of between 30 to 40m² per litre (depending upon surface porosity) is recommended. Excessive application of NATUROL CR2 may be detrimental to the concrete surface finish; care should therefore be taken to ensure that NATUROL CR2 is applied as recommended to achieve optimum performance and maximum economy.
Manufacturered in sealed drums requires no special storage facilities. This type of material should be applied in well ventilated areas.
Practically unlimited in sealed containers.
NATUROL CR2 mould release agent is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
Prolonged physical contact should be avoided and personal and environmental hygiene encouraged in common with the use of all mould release agents. Where contact with skin occurs, the material should be removed with soap and water. If splashes affect eyes, they should be bathed immediately with copious quantities of clean water and if discomfort persists, medical attention should be sought without delay.
See Safety Data Sheet for further information.
Additional information
| Size (available in) | 5l, 20l, 25l, 205l, IBC |
|---|---|
| Coverage | 30-40m2 per litre |
| Certified | Eco, Safe |
Related products
-
Safelease
Read More +Mould Release Emulsion
Developed using the latest water soluble polymer technology, to produce an environmentally friendly and highly effective mould release agent for general site use.
A low odour, low VOC, non-staining mould release agent designed with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface.
It is particularly suited for white or fair faced concrete finishes.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
- WRAS
-
Adoseal LS (Light Stable)
Read More +Polyurethane Based Formwork Face / Surface Sealer
Adoseal LS is a high performance aliphatic polyurethane resin developed for sealing and protecting porous surfaces. It is a solvent based gloss sealer that has excellent non-yellowing characteristics which means it can be used outdoors. Once dried and cred it creates a highly durable wear layer which is colour free and fully transparent and tack free.
It is a high solids but low viscosity resin which makes it easy to apply. We recommended two coats for most application. A slightly thinned down first coat to ensure full absorption into the substrate and than a second coat as supplied, applied on top. The resulting coating offers a very good water and stain
resistance.Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 5m²/litre depending upon surface porosity -
Naturol CR3
Read More +High Concentration, Mould Release Agent
Naturol CR3 is a blend of natural vegetable oils in a new, very low odour solution to create a high performance chemical release agent for all site and precast use, especially for indoor use . It achieves a very high quality concrete finish and is suitable for all modern mould surfaces. Naturol CR3 will aid elimination of blowholes and provide a clean uniform and non-stained surface.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Naturol CR3 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release. Suitable for indoor and outdoor use.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
