Extracon XS
Fast Drying Mould Release Agent
Designed for everyday site use, and on all types of formwork.
Extracon XS is a highly efficient yet cost effective mould release agent, offering excellent coverage rates.
Forming a physical barrier between the formwork and the concrete giving a quick, clean and easy release, with minimum blowhole formation and providing a sharp, uniform and nonstained concrete surface.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality due to its fast drying capability.
| Size (available in) |
|
|---|---|
| Coverage | 30-40m2 per litre |
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.: 571
Revision No.: v2
Download Extracon XS Data Sheet 2025
Request Safety Sheet
Designed for everyday site use, and on all types of formwork. EXTRACON XS is a highly efficient yet cost effective mould release agent, offering excellent coverage rates. Forming a physical barrier between the formwork and the concrete giving a quick and easy release with minimum blowhole formation and providing a sharp, uniform and non-stained concrete surface.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality due to its fast drying capability.
• EXTRACON XS is suitable for use with all types of formwork.
• It is a suspension and sediment free, highly mobile liquid, which can be used in very fine sprays without clogging the jets.
• Has no unpleasant odour even when using a fine fog spray.
• Very economic coverage rates can be obtained without difficulty.
• Retains its mobility at low temperatures.
• It may be applied immediately prior to casting, or treated forms may be left until apparently dry.
Widespread experience shows that treated forms can be exposed to weather for 14 days without retreatment to give the usual excellent results
• Continued use gives progressively better results on timber formwork.
• Dries in 1-2 hours to give a safe walking surface on soffits shutters which are not affected by rain.
• Can be used with either grey or white cement, also concretes containing pigments.
• Provides a quick, positive release of formwork, reducing labour costs and damage to formwork and moulds.
• Drastically reduces the incidence of blowholes, surface blemishes and staining.
• It is an effective rust inhibitor.
Do Not Dilute. Apply by spray, brush or swab prior to each concrete pour, and as near to time of placement of concrete as practical conditions permit. Timber and other porous forms which have not been treated with ADOSEAL or other suitable sealers should initially be treated with a double coat of EXTRACON XS the first applied heavily and allowed to stand for maximum absorption before the second is applied in normal manner. On vertical forms any excess material accumulating at the bottom of the form should be removed.
A thin coating spray applied to give a coverage area of between 30 to 40m2 per litre (depending upon surface porosity and ambient temperature) is recommended. Excessive application of EXTRACON XS may be detrimental to the concrete surface finish; care should therefore be taken to ensure that EXTRACON XS is applied as recommended to achieve optimum performance and maximum economy.
EXTRACON XS is based in a flammable solvent. Store in a cool, well ventilated area. Keep container tightly closed. Keep away from sources of ignition. Avoid any build-up of electrostatic charge in the immediate area. Ensure that lighting and electrical equipment nearby are not a source of ignition.
Practically unlimited in sealed containers.
EXTRACON XS is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
During application avoid contact with eyes and skin. In the event of eye contact irrigate immediately with copious quantities of water and then seek medical advice. In the event of skin contact, wash with soap and water
See separate Safety Data Sheet for further information.
Additional information
| Size (available in) | 5l, 20l, 25l, 205l, IBC |
|---|---|
| Coverage | 30-40m2 per litre |
Related products
-
Plastrip S
Read More +Maximum Concentration, Low-Medium Viscosity, Mould Release Oil
Plastrip S is a chemical release agent specifically formulated to give easy release of plastic and thermoplastic mould liners, providing a high quality surface finish, but is suitable for all types of formwork.
It is easily applied and may be applied to formwork immediately prior to casting without reducing the finished quality.
Plastrip S will also offer corrosion protection to any metal surface.biodegradable and non-staining product that facilitates easy formwork release giving a very high quality surface finish.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
-
Adostrike
Read More +High Oil Content Solvent Based Mould Oil
Designed for general site and precast use, Adostrike is a higher concentration of mould release chemicals blended together to achieve the highest quality concrete finish.
Adostrike is a premium quality mould oil that offers excellent release characteristics.
It has low sag qualities which allows application long in advance of casting without loss in release performance or quality of finish.
Suitable for use on all types of formwork, even on sealed or unsealed timber in all climatic conditions.
It is highly resistant to removal by rain showers or foot traffic.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre -
Naturol CR2
Read More +High Concentration, Mould Release Agent
Naturol CR2 is a blend of natural vegetable oils designed for general site and precast use.
A high concentration release oil that is easily applied and suitable for all types of formwork, even on sealed or unsealed timber in all climatic conditions.
Highly resistant to removal by rain showers or foot traffic.
It is particularly suited for white or fair faced concrete finishes.
Naturol CR2 is a safe, environmentally friendly, readily biodegradable and non-staining product that facilitates easy formwork release. Suitable for indoor and outdoor use.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 30-40m2 per litre Certified - Eco
- Safe
