ADOCOAT TFC is a non-VOC, solvent free, professional grade epoxy system. It
is supplied as a two-pack system and cures to give a highly durable
waterproof coating. The product can be specified into most commercial and
light industrial applications; it exhibits high substrate adhesion, a broad range
of chemical resistance, U.V. resistance and a Class 1 fire rating. It is ideally
suited to provide protection against non-potable water, brine, mineral acids,
alkalis and plant derived materials such as vegetable oils. Chemical resistance
to other chemicals should be queried with the Technical Department prior to
specification. The product can be blinded with aggregate to provide a slip
resistant surface or a key for rendering etc.

Surfaces should be smooth, clean, dry, sound and free from frost, oils, grease and other contamination.
Product may be applied to ‘green’ concrete. Any surface defects (holes etc.) should be filled with a
suitable filler.
For masonry applications, joints should be flush pointed with a suitable cementitious product prior
to application. Where existing surfaces are very rough, a sand/cement render coat may be required.
For metal applications, prepare the surface by wire brushing or sand blasting. Treat the surface with an
anti-corrosive primer for best results. Alkyd and epoxy-based steel primer primers are compatible.
For concrete applications, surfaces should be smooth. Mildly tamped, brushed and floated surfaces are
also acceptable.
The minimum ambient temperature for application is 5°C, it is not recommended to apply the product
at temperatures below this as a cure will not be achieved. Ensure reasonable ventilation to obtain best

Coverage 4m2/litre

Drying Time 4-6 hours at 23˚C

Store in a cool, dry, well ventilated area. Keep containers tightly closed. Store in the original manufacturer supplied containers

The Product has a 12-month shelf life subject to storing

ADOCOAT TFC is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product please consult our Technical Department

Care should be taken to avoid splashes entering eyes. Contact with skin should be avoided and hands washed thoroughly in the event of accidental contact. ADOCOAT TFC should not be ingested. If splashes affect eyes, they should be bathed immediately with copious quantities of clean water and if discomfort persist medical attention should be sought without delay.
See separate Safety Data Sheet for further information.