Adopatch Kerb Repair
Adopatch Kerb Repair
A pre packed, single component, shrinkage compensated, cementitious kerb mortar suitable for rapid repair, making good and speedy return to service.
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 02/01/2025
Tech Data Sheet No.:450
Revision No.: v1
A pre packed, single component, shrinkage compensated, cementitious kerb mortar suitable for rapid repair, making good and speedy return to service.
Kerb Repair Mortar is manufactured with the inclusion of a polymer to promote adhesion
and water resistance, and a water reducing agent to facilitate a low water cement ratio.
Adopatch Kerb Repair Mortar is easy to use, fast setting—30mins at 20°c, with high early strength development which facilitates rapid return to service.
Adopatch Kerb Repair Mortar is suitable for repairing damaged kerb stones, cracks, gaps and holes in flooring
and walls.
Adopatch Kerb Repair is a high build repair mortar that can be applied from 2-50mm
• Working Time 10-15minutes. Setting time 30 minutes
• Rapid setting mortar that facilitates quick return to service
• Easy to use—mix only with clean water
• Slump free—Easy to smooth & Float
• Ideal for the rapid repairs to damaged kerb stones, cracks &holes in flooring,
stairs & steps
• Ready for overcoating within 90 mins @ 2mm
• Suitable for vertical applications. High Build 20-50mm
Typical data
Mix Ratio (water/powder): 1: 4.6-4.8 by weight (approx. 17-19% water)
Walk on Setting Time 20-30 minutes @20°>C Working Time :10-15minutes (@20°C)
Compressive Strength (MPa) after 28 days > 35N/mm²
Flex Strength after 28 days >4MPa
Fresh Wet Density 2.05 +/-0.10 g/cm3
Application thickness 2mm –20mm unfilled and 20-50mm when blended with equal weight of a graded aggregate
Keep container sealed when not in use. Avoid contact with moisture.
When stored correctly, the shelf life is 12 months for pails and 6 months for sacks
Adopatch Kerb Repair Mortar is supplied by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions.
For specific advice regarding any aspect of this product, please consult our Technical Department
In common with other cementitious materials ADOPATCH KERB REPAIR MORTAR is highly alkaline and therefore corrosive.
It can cause serious eye damage, and skin irritation.
Contact with skin and eyes should be avoided. When handling & using suitable PPE including gloves, overall and goggles should be worn.
If contact with skin should occur wash affected area well. Should material enter eyes irrigate thoroughly with clean water and if discomfort continues seek
medical advice without delay.
Refer to separate ADOPATCH KERB REPAIR MORTAR Health and Safety sheet.
Additional information
| Size (available in) | 25Kg, 8Kg |
|---|---|
| Coverage | 2 kg will fill approximately 1m2 by 1mm deep |
| Certified | CE, Safe |
Related products
-
Resomast Mortar
Read More +Polyester Resin Compound
Resomast Mortar provides the ideal solution in numerous applications involving concrete and masonry repairs, jointing, filling and grouting where rapidly developed high strengths are required.
Resomast Mortar consists of two components, a liquid Resin and Hardener which is an activated filler so it bonds tenaciously to all structural surfaces.
In Resomast Mortar the material can be mixed with a reduced amount of activated filler so as to wet-out the surfaces to be bonded.
Packaging includes proportioning cups and an outer plastic container which can be used as a mixing vessel.
Size (available in) - 25Kg
Coverage 2kg will fill approximately 1m2 by 1mm deep Certified - CE
-
Adopatch HB45
Read More +Adopatch HB45 is a high-build, hand/wet-spray applied,
one-component polymer modified and fibre reinforced
structural repair mortar. Adopatch HB45 is a thixotropic
mortar made up of dry powders, selected aggregates,
polymers and fibres, which when mixed with water allows
it to be used vertically and overhead.
Without the use of formwork, Adopatch HB45 can be
applied in a single application of up to 80 mm thickness
in vertical applications and up to 60 mm thickness in
overhead applications. When larger thicknesses are
necessary, sections can be built up in stages or with the
use of formwork -
Epomast Crack Seal
Read More +Epoxy Resin Sealer for Concrete Crack Repair
Epocrack Seal is a two pack solvent free epoxy repair resin and has been formulated as an extremely low viscositymsystem for gravity feeding or pressure injecting into finem cracks, voids and fissures in concrete.
The low viscosity allows the system to fully penetrate and thoroughly wet out the surfaces.
Epocrack Seal has a long pot life to assist penetration and provide long usable work time.
Repaired cracks are completely sealed against water ingress, applications include repair of concrete beams, columns, slabs and walls etc.
Size (available in) - 1Kg
Coverage 5m2 per litre Certified - CE
