Adopatch HB45 is a high-build, hand/wet-spray applied,
one-component polymer modified and fibre reinforced
structural repair mortar. Adopatch HB45 is a thixotropic
mortar made up of dry powders, selected aggregates,
polymers and fibres, which when mixed with water allows
it to be used vertically and overhead.
Without the use of formwork, Adopatch HB45 can be
applied in a single application of up to 80 mm thickness
in vertical applications and up to 60 mm thickness in
overhead applications. When larger thicknesses are
necessary, sections can be built up in stages or with the
use of formwork

Colour: Grey
Fresh wet density: 2.00 ± 0.10 g/cm3
Mixing ratio: 3.5 litre of water for 25 kg
Minimum application
temperature: 3o
C
Compressive strength:
BS EN 12190 ≥ 50 N/mm2
@ 28 days
Flexural strength:
BS 6319-3 ≥ 7 N/mm2
Tensile strength:
BS 6319-3 ≥ 3 N/mm2
Adhesion bond:
BS EN 1542 ≥ 2 N/mm2
Chloride ion content:
BS EN 1015-17 ≤ 0.05 %
Thermal compatibility:
freeze-thaw cycling
BS EN 13687-1
≥ 2 N/mm2
Capillary absorption:
BS EN 13057 ≤ 0.5 kg·m-2·h-0.5
Carbonation
resistance:
BS EN 13295
Pass
Dangerous
substances:
BS EN 1504-3 Complies with 5.4

Approximately 13.5 – 14.5 litre per 25 kg bag. (approx. 72
bags/m³).

Adopatch HB45 has a shelf life of 12 months from the date
of manufacture if stored at temperatures between 2°C and
35°C in original unopened bags.
If these conditions are exceeded, Adomast Manufacturing’s
Technical Department should be contacted for advice

12 months from the data of manufacture

Adopatch is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product please consult our Technical Department

Adopatch HB45 may cause irritation to skin or eyes.
In case of accidental contact with eyes, immediately flush
with plenty of water for at least 10 minutes and seek medical
advice if necessary.
For further information, refer to the Material Safety Data
Sheet.
FIRE
Adopatch HB45 is nonflammable.
Adocoat ZR is flammable. Ensure adequate ventilation.
Do not use near a naked flame and do not smoke during
use. Extinguish with CO2
or foam. Do not use a water jet.
Flash Point:
Adocoat ZR: 23°C