Adopatch Fairing Coat
Adopatch Fairing Coat
Filling of minor cracks. Thin layer render. Skim coat for pin holes and minor honeycomb repairs. Concrete repair. Pore sealer and levelling mortar. To produce a uniform surface for subsequent paint finishes and coatings.
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.:405
Revision No.: v23
Adopatch Fairing Coat is a one component acrylic polymer modified powder. When mixed with water, Adopatch Fairing Coat produces a highly consistent, smooth, trowellable, shrinkage compensated fairing coat mortar.
Adopatch Fairing Coat is suitable for application in the range of feather edge up to 3 mm, it also can be used to infill honeycombing and voids up to 5 mm deep for vertical and overhead applications.
- Single component, easy to use
- High polymer content – Reduces the risk of cracking
- High bond strength
- Fair faced finish
Typical Properties
Compressive Strength N/mm2
1 day 5.0
7 days 8.0
28 days 13.0
Flexural Strength N/mm2
1 day 1.0
7 days 2.5
28 days 4.0
Coefficient Thermal Expansion 13.6 x 10-6 oC
WSR: 0.18
Fresh Wet Density: 1875 kg/m3
Initial Set: 2 hours
Final Set: 3 hours
Application thickness: 1 – 6mm
Yield: 15.75 litres / bag
25kg sacks – 15m2 at 1mm depth
Palletised adopatch fairing coat should be stored in a cool dry area, clear of the ground, sheeted or under cover and stacked no more than 2 pallets high
A minimum of 3 months but in excess of 6 months depending on temperature and humidity.
Adopatch is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product please consult our Technical Department
During application avoid contact with eyes and skin. In the event of eye contact irrigate immediately with copious quantities of water and seek medical advice. In the event of contact with skin wash with soap and water.
Wear protective eyewear and gloves when handling and using.
See safety data sheet for more information.
Additional information
| Size (available in) | 25Kg, 8Kg |
|---|---|
| Coverage | 2 kg will fill approximately 1m2 by 1mm deep |
| Certified | CE, Safe |
Related products
-
Epomast Mortar
Read More +Epoxy Resin Based Repair Mortar
A cementitious powder compound blended with an epoxy resin to create a high strength, high chemical resistant, waterproof, low slump repair mortar.
Epomast Mortar has been developed to produce a repair mortar that has excellent abrasion resistance and durability, has virtually no shrinkage and offers excellent adhesion to most building surfaces, whether they be on the horizontal, vertical or even inverted.
Typical applications include bedding in of fixing bolts and dowels, bridge bearing pads and repair and resurfacing of stairs.
Size (available in) - 25Kg
Coverage 2 kg will fill approximately 1m2 by 1mm deep Certified - CE
-
Adoplug
Read More +Wall Tie Filler & Sealing Compound
Adoplug is a polymer modified, fibre reinforced, ultra fine cementitious repair mortar designed specifically for plugging tie holes.
It has been designed to impart high strength, low shrinkage and cracking characteristics along with excellent chemical and weather resistance.
When mixed with water it forms a cohesive, easy to apply, shrinkage compensated compound and cures to develop a strongly bonded watertight plug to form an effective seal.
Size (available in) - 8Kg
- 25Kg
Coverage 2 kg will fill approximately 1m2 by 1mm deep Certified - Safe
- CE
-
Adopatch White/Grey/50-50
Read More +Rapid Set Repair Compound
Adopatch is a cementitious powder compound with the inclusion of a polymer to promote adhesion and resistance to the passage of water and a water reducing agent to facilitate a low water : cement ratio.
The mortar sets within minutes and develops compressive strengths within hours in excess of fully cured concrete.
Adopatch is available in grey and white colours so they can be blended to match most shades of concrete.
Size (available in) - 8Kg
- 25Kg
Coverage 2 kg will fill approximately 1m2 by 1mm deep Certified - Safe
- CE
