A liquid plasticiser and water reducing agent that imparts extremely high workability when added to a concrete mix
Being a highly effective deflocculating agent, it disperses cement paste into its primary particles, significantly increasing the flow characteristics of the paste.
This permits significant reduction in water content of normal workability concrete producing higher early and ultimate strengths.
ADOFLOW EXTRA also enables the concrete to achieve high compaction with minimal or no tamping and its increased flow assists with difficult pours.

The optimum addition rate of ADOFLOW EXTRA is best determined after preliminary trials with the actual concrete under consideration. As a guide for carrying out trials an addition rate of 0.5 litres to 1.5 litres per 100 kilos of Portland cement is recommended. Where high early and ultimate strength concrete is required, necessitating a steep reduction in water/cement ratio, the addition rate of ADOFLOW EXTRA may be increased upto 2.0 litres per 100 kilos Portland cement.
Mixing:
ADOFLOW EXTRA is best added during the mixing cycle preferably at the same time as the water. Alternatively it may be added to a normal concrete mix just prior to the pour allowing for a further mixing cycle of at least 2 minutes.
Typical Comparisons:
The following data is typical of what can be expected when comparing a concrete mix with the inclusion of ADOFLOW EXTRA to a control mix.
High Workability Self Compacting Concrete:
• Aggregate/Cement Ratio 5.2:1 • W/C Ratio – Control Mix 0.58
• W/C Ratio – Test Mix 0.58
ADOFLOW EXTRA -Test Mix 1.0 litre per 100 kg OPC:
• Slump – Control Mix 50mm • Slump – Test Mix Collapse
Compressive Strength -Test Mix:
• 7 days: 102% of control • 28 days: 103% of control
High Early & Ultimate Strength Concrete:
• Aggregate/Cement Ratio 5.2:1 • W/C Ratio – Control Mix 0.58
• W/C Ratio – Test Mix 0.47
ADOFLOW EXTRA -Test Mix 1.25 litre per 100 kg OPC
• Slump – Control Mix 50mm • Slump – Test Mix 150mm
Compressive Strength -Test Mix:
• 1 day: 180% of control • 7 days: 144% of control
• 28 days: 135% of control

1.2 Litre of ADOFLOW EXTRA per 100Kg of Portland Cement.

Store at temperatures above freezing but not above 28°C in dry condition and under cover. Should freezing occur completely thaw material and then mix thoroughly before use.

If stored in accordance to the above, In these circumstances shelf life is indefinite.

ADOFLOW EXTRA is manufactured by Adomast Manufacturing Ltd and shall be applied in accordance with the manufacturers instructions.

ADOFLOW EXTRA is non-hazardous in normal use. If splashes should affect the eyes bathe immediately with copious quantities of clean water and then immediately seek medical advice.