Adoflow R
Slows the Rate of Hydration of Cement Allowing Longer Times Between Mixing and Placing
The inclusion of ADOFLOW-R in a concrete mix will slow the rate of hydration of the cement, to hold back initial and final set, as well as reduce the peak temperature resulting from the hydration process thereby minimising the risk of cracking.
Due to these characteristics the inclusion of ADOFLOW-R in a concrete mix, as well as providing all the benefits obtained from the use of a standard set plasticiser will also facilitate longer time available between mixing and placing and avoidance of cold joints between pours.
Also pours of greater volume with reduced risk of cracking are achievable.
| Size (available in) |
|
|---|---|
| Coverage | 0.8-1.0 litre per 50 kg cement |
| Certified |
|
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 01/02/2025
Tech Data Sheet No.: 404
Revision No.: v2
Download Adoflow R Data Sheet2025
Request Safety Sheet
The inclusion of ADOFLOW-R in a concrete mix will provide similar characteristics and benefits to those provided by ADOFLOW-S Standard Setting Plasticiser. In addition to this it will also reduce the rate of hydration of the cement, to retard initial and final set, as well as reduce the peak temperature resulting from the hydration process thereby minimising the risk of cracking.
1 Longer time available between mixing and placing
2 Avoidance of cold joints between pours
3 Pours of greater volume with reduced risk of cracking
Composition
A concentrated aqueous solution of modified lignin based water reducing agent containing no chlorides or nitrates.
Typical Effect ofTemperature on Final SettingTime
Tests carried out on a mortar consisting of 3 parts sand to 1 part cement by weight with water/cement ratio of 0.58.
Final set recorded as being equivalent to a compressive strength of 3.5 N/mm2 measured by Proctor Penetrometer.
ADOFLOW-R Approx. Time to Final Set (hrs)
| Per 50 Kg Cement | 10°C | 20°C | 30°C |
| None | 12 | 8.5 | 5 |
| 100 ml | 13.5 | 9.5 | 6 |
| 250 ml | 16.5 | 12 | 8 |
| 500 ml | 22 | 18 | 13.5 |
Typical Effect on Slump and Compressive Strengths
Test carried out on concrete mixes with aggregate/cement ratio 4.7:1,water/cement ratio adjusted to give equal initial slump and initial mix temperature and curing temperature 20°C.
| ADOFLOW-R | W/C ratio | Initial Slump | Approx. Time Slump Reduction to 20mm | Compressive Strength Mpa. | |||
| Per 50 Kg Cement | 3 days | 7 days | 28 days | ||||
| None | 0.58 | 65mm | 2 hrs | 16.6 | 27.4 | 42.8 | |
| 140ml | 0.52 | 65mm | 3.5 hrs | 16.4 | 28.8 | 47.2 | |
| 280ml | 0.49 | 65mm | 5 hrs | 16.7 | 31.3 | 52.3 | |
| 560ml | 0.46 | 65mm | 6.5 hrs | 17.1 | 32.2 | 55.1 | |
Note: 1 MPa. = 1N/mm2 = 145 psi
It is generally found that when ADOFLOW-R is added to a concrete mix and water/cement ratio adjusted to give equal slump to the control mix, 3 day strengths are similar to those of the control mix, whilst 7 day and 28 days strengths are up to 15% and 30% greater respectively
Use : Approx 150 -1000 ml. ADOFLOW-R to 100 kilos Portland Cement, added to the gauging water or pre-wetted mix. Suitable for use with all types of Portland Cement.
Protect from freezing. In the event of freezing, material should be completely thawed and then thoroughly mixed before use.
Shelf life is minimum 3 months but could be in excess of 6 months subject to temperature and humidity.
Adomast Adoflow R is supplied by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product, please consult our Technical Department
Adomast Adoflow R is non-hazardous & not flammable
During application avoid contact with eyes and skin. In the event of eye contact irrigate immediately with copious quantities of water and then seek medical advice. In the event of skin contact, wash with soap and water.
Additional information
| Size (available in) | 5l, 20l, 25l, 205l, IBC |
|---|---|
| Coverage | 0.8-1.0 litre per 50 kg cement |
| Certified | Eco, Safe |
Related products
-
Adoflow S
Read More +Standard Set Plasticiser
Helps up to 25% reduction in added water content for a given slump with the resultant reduction in water / cement ratio providing increased strengths.
Alternatively it can be used to increase slump by 150% without any increase in water content. It will aid workability without an increase in water / cement ratio.
Adoflow S imparts easier and speedier placing and compaction of the concrete with reduced shrinkage and minimal cracking.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 0.2L per 100kg of Portland cement -
Adoair PL
Read More +Concrete Air Entraining & Plasticising Agent for Precast Concrete
Adoair PL is a chemical blend designed to impart the deliberate and controlled entrainment of air in concrete in the form of disconnected, uniformly dispersed microscopic air bubbles and water reducing chemicals to aid the plasticising properties.
Adoair PL helps improve the surface detail and surface wearing properties and help improve cast detail or corners and helps reduce breakages on concrete block formation.
The micro bubbles help produce frost resistant concrete and impart resistance to passage of water through hardened concrete.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 50-150ml per 50kg of Portland Cement Certified - Safe
-
Adobond SBR
Read More +Adobond SBR
ADOBOND SBR is a styrene-butadiene emulsion which offers excellent adhesion to concrete, brickwork masonry, renders and steel.
It also imparts excellent waterproof and weather resistant properties. Applications include waterproofing basement structures, underlying levelling screeds, wear resistant flooring or in concrete repairs.
It can also be used as an admixture to improve flexibility, tensile strength and reduced shrinkageSize (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage See Data Sheet Certified - Safe
