We manufacture a range of premium concrete curing agents and surface retarders.
We offer curing agents that are both easy to apply and quick drying. The film forming coatings optimise the curing of concrete to the highest efficiency levels.
All our concrete curing technologies allow full hydration to be achieved, resulting in higher strength, significantly reduced surface dusting & cracking, and low shrinkage concrete that is much more durable.
Our Safetard concrete retarding agents are WRAS approved and have been the primary retarding compound used in the UK construction industry for many years.
We offer products for aggregate exposure on both vertical & horizontal surfaces. The Safetard products delay the set of cast concrete for up to 24 hours.
Showing 1–9 of 15 results
-
Adocure Sealer
Read More +Concrete Curing & Sealing Compound
Adocure sealer is a clear, low viscosity acrylic polymer resin solution, targeted primarily for application to surfaces of freshly laid concrete where it has a double function.
Firstly, to form a highly effective concrete curing membrane that conforms to ASTM C309 and secondly to act as an in-depth sealer for the hardened concrete rendering its surface dustproof and extremely hard wearing.
Adocure Sealer is also available for Power Floated floors – Adocure Sealer PF.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre -
Adocure Sealer PF
Read More +Concrete Curing & Sealing Compound for Power Floated Flooring
Adocure sealer PF is a clear, low viscosity acrylic polymer resin solution, targeted primarily for application to surfaces of freshly laid concrete that has been power floated.
It has been designed with dual functionality:
Firstly to form a highly effective concrete curing membrane that conforms to ASTM C309.
Secondly to act as an in-depth sealer for the hardened concrete rendering its surface dustproof and extremely hard wearing.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre -
Adocure Sealer Pro
Read More +Adocure Sealer Pro
A clear high solids acrylic polymer coating primarily for application to surfaces of freshly laid concrete where it has a double function, firstly to form a highly effective curing membrane and secondly is to act as an in-depth sealer for the hardened concrete rendering its surface dustproof and extremely hard wearing. Its secondary function and benefits are also applicable when the material is applied to existing concrete surfaces. The treated concrete will have a higher gloss surface appearance than regular Adocure Sealer or AdoFloor Seal but due to the greater acrylic content the surface will have superior durability and abrasion resistance.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre -
Adocure Standard
Read More +75% Efficiency Concrete Curing Compound
Applied to the surface of freshly laid concrete, Adocure Standard physically ‘locks’ moisture into freshly cast concrete allowing full hydration of the cement allowing the concrete to fully cure. This is achieved by covering the surface of the concrete with a very thin resin film that prevents moisture in the concrete from leaving the surface.
Benefits – reduced surface shrinkage and cracking, more durable hard wearing surface and prevention of dusting.
Adocure Standard is also available in an Aluminised Version – Adocure Standard AL to aid UV reflectivity, and in a fugitive dye tinted form to assist visual indication during application – Adocure Standard T.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre -
Adocure Super
Read More +90% Efficiency Concrete Curing Compound
Applied to the surface of freshly laid concrete, Adocure Super physically ‘locks’ moisture into freshly cast concrete allowing full hydration of the cement thus allowing the concrete to fully cure. This is achieved by covering the surface of the concrete with a very thin resin film that prevents moisture in the concrete from leaving the surface.
Benefits – reduced surface shrinkage and cracking, more durable hard wearing surface and prevention of dusting.
Adocure Super available in an Aluminised version –Adocure Super AL to aid UV reflectivity, and in a fugitive dye tinted form to assist visual indication during application – Adocure Super T.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre -
Adocure WW
Read More +Water Based Surface Hardener and Curing Agent
Adocure WW is an aqueous silicate solution that reacts to deposit an integral layer of high strength crystals in the concrete pore structure.
Helps prevent premature drying out of the concrete surface reducing the risks of surface cracking and dusting.
Improves the durability of the concrete surface.
Economical and very easy to use.
Adocure WW is also available in a fugitive dye tinted form to assist visual indication during application – Adocure WWT.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 4-6m2 per litre Certified - Safe
-
Adotard MF
Read More +Adotord MF and MF Pro provides an exposed aggregate finish for concrete as an attractive architectural feature or as a key for subsequent pours or renders. ADOTARD-MF / PRO used for application to mould face prior to placing of concrete. ADOTARD-MF / PRO is an off-white to light brown latex emulsion paint. Adotard MF Pro is a more concentrated version & will expose a greater aggregate depth over the same time period
-
Adotard MF-Pro
Read More +Concentrated Version of Adotard MF Surface Retarder for Deeper Aggregate Exposure
Adotard MF Pro has been formulated to retard but not kill the set of freshly placed concrete, to provide an exposed aggregate finish for concrete or ‘keyed’ surfaces for subsequent pours or renders.
It adheres firmly to the mould face so it is not displaced during pouring, avoiding un-retarded patches or where clear demarcation between face and exposed aggregate is required.
It has an extended retardation period enabling the main body of concrete to achieve higher strength before mould is stripped.
It will not discolour concrete that it comes into contact with.
Size (available in) - 5l
- 25l
Coverage 13-15m2 per litre -
Adotard TF
Read More +Aggregate Exposing Spray on Compound
Once applied to the surface of freshly cast concrete, Adotard TF slows the setting of the cement and helps provide an exposed aggregate finish, either as an attractive architectural feature or as a key for subsequent pours or renders.
Adotard TF is a water based compound which is easy to use and apply. Our standard grade will expose between 3 to 5mm of aggregate, and it will not discolour concrete.
It will retard but not kill set of cement therefore accidental contact with reinforcement will not impair bond of reinforcement to concrete nor will local over-application prevent uniform aggregate exposure.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 3 – 5m2 per litre Certified - Safe
- Eco
