Adopatch Rapid Repair Mortar
Adopatch Rapid Repair Mortar is a pre-packed single
component cementitious repair mortar suitable for
repairing and making good internal floors, stairs and steps
and for general repairs to cracks and holes.
- Description
- Additional information
- Enquiry form
Description
Datasheet details
Date of issue: 02/01/2025
Tech Data Sheet No.0.04
Revision No.: v1
Adopatch Rapid Repair Mortar is a pre-packed single component cementitious repair mortar suitable for repairing and making good internal floors, stairs and steps and for general repairs to cracks and holes.
» Fast setting with high early strength development which
facilitates quick return to service.
» Easy to apply, single component, require only addition
of water.
» Exhibits good mechanical properties.
» Suitable for vertical applications, No cracks or sagging.
» Durable.
» Cost effective
Adopatch Rapid Repair Mortar can be applied to rigid
sound surfaces – sand/cement screed or concrete bases,
asphalt, granolithic, terrazzo, ceramic and quarry tiles,
epoxy and polyurethane coatings.
Adopatch Rapid Repair Mortar can be applied up to a
thickness of 20 mm. For increased economy, the mortar
can be bulked out by adding up to an equal volume of
graded aggregate. Small localised repairs over 20 mm, but
not exceeding 50 mm, should be bulked out with an equal
weight of graded aggregate
Keep sealed when not in use. Avoid contact with moisture.
A minimum of 3 months but in excess of 6 months depending on temperature and humidity.
Adopatch Rapid Repair Mortar is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product please consult our Technical Department
During application avoid contact with eyes and skin. In the event of eye contact irrigate immediately with copious quantities of water and seek medical advice. In the event of contact with skin wash with soap and water.
Wear protective eyewear and gloves when handling and using.
See safety data sheet for more information.
Additional information
| Size (available in) | 25Kg, 8Kg |
|---|---|
| Coverage | 2 kg will fill approximately 1m2 by 1mm deep |
| Certified | CE, Safe |
Related products
-
Adobond SBR
Read More +Adobond SBR
ADOBOND SBR is a styrene-butadiene emulsion which offers excellent adhesion to concrete, brickwork masonry, renders and steel.
It also imparts excellent waterproof and weather resistant properties. Applications include waterproofing basement structures, underlying levelling screeds, wear resistant flooring or in concrete repairs.
It can also be used as an admixture to improve flexibility, tensile strength and reduced shrinkageSize (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage See Data Sheet Certified - Safe
-
Concrete Primer A
Read More +Acrylic Solution for Primer Coating Porous Construction Surfaces
Concrete Primer A is a milky white dispersion of acrylic polymer, designed to penetrate into the porous substrate in order to enhance the adhesion of concrete repair mortars or other cementitious based repair materials.
It is a water based compound which is safe and non-hazardous to use. It has excellent adhesion to a wide range of substrates and will reduce the risk of bond failure. It will also reduce suction from porous concrete, helping prevent rapid drying of applied repair material.
Size (available in) - 5l
- 20l
- 25l
- 205l
- IBC
Coverage 3-5m2 per litre (once diluted with water) Certified - Safe
-
Adopatch HP Repair Mortar
Read More +Adopatch HP is a pre-blended, rapid setting structural cementitious repair mortar., designed for hand applied concrete repair where a
rapid return to service and a moderate high strength is required. Adopatch HP Repair Mortar contains acrylic copolymers and
polypropylene fibres to resist cracking, shrinking and to ensure an extremely high bond in wet conditions and to provide high build
qualities.
