ADO OIL CLEAN is a new product designed as a high performance surface cleaner. It will remove oil and grease stains from concrete flooring.
ADO OIL CLEAN is a biodegradable solvent that works best as supplied, but can be diluted to create water soluble cleaning products.

Use as supplied, recommend testing on a small hidden portion of the substrate before applying, Shake the product well before use.

Apply liberally to the area for treatment. Allow to react for 5-10 minutes (time required depends on the thickness of the deposits being removed). Rinse the entire substrate with a high pressure washer, once the material deposits have softened. Otherwise brush off using a thick bristle broom and then rinse with water from a hosepipe whilst brushing at the same time.
Do NOT allow the product to dry prior to rinsing.
Application Tools: Apply with a low pressure hand spray unit, a roller or a brush.
Cleaning Application Equipment: Tools should be cleaned with water immediately after use.
For best results it is essential that ADO OIL CLEAN is used when the temperature of the substrate is between 5 and 30°C.
Do NOT apply in the rain or in very hot weather

Do NOT dilute or mix with another product

Approx. 5-8 m2 / litre – these are for guidance only, and can be influenced by porosity of the surface material and also the ambient temperature

ADO OIL CLEAN is based in a flammable solvent. Store in a cool, well ventilated area. Keep container tightly closed. Keep away from sources of ignition. Avoid any build-up of electrostatic charge in the immediate area. Ensure that lighting and electrical equipment nearby are not a source of ignition.

Practically unlimited in sealed containers, and if stored as per the recommendations above.

ADO OIL CLEAN is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s Instructions. For specific advice regarding any aspect of this product, please consult our Technical Department

Breathing Protection – The product has a citrus odour but for long term use a mask should be worn
Hand Protection – Wear rubber gloves
Skin Protection – Overalls should be worn when using
Eye Wear Protection – wear protective goggles
In case of ingestion: Do not induce vomiting. Not likely to be toxic. Contact a doctor
Eye Contact: Can cause mild to severe irritation. Wash thoroughly with running water for 15 mins. Consult a Doctor.
Inhalation: May cause throat, nose and respiratory irritation.
Skin Contact: Mild Irritant. Wash thoroughly with hot soapy water. Any persistent irritation then consult a doctor.
See Safety Data Sheet for further information.