Adowash has been developed for the cleaning of sprayers and other equipment that has been used with film forming resins or oil based mould release agents. It helps prolong the life of the sprayer and other valuable equipment and ensures that the proper spray patterns and dose rates
are adhered to.

ADOWASH solvent cleaner should be used at full strength.
Immerse small parts in ADOWASH and agitate for several minutes, use a small brush to remove stubborn adhesions. Large parts and hoses should be flushed out repeatedly with ADOWASH and excess material returned to the drum.
ADOWASH may be used for several applications but effectiveness will be gradually reduced.

Keep containers sealed. Store in dry conditions at room temperature and away from direct heat. All applicable storage requirements for
flammable materials should be observed.
ADOWASH is flammable and care should be taken when using and when disposed of.

When stored correctly in unopened container storage stability is 1 year.

ADOWASH is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product, please consult our Technical Department

Material is flammable. Avoid physical contact with material and inhalation. If contact with skin should occur wash with soap and water. If
splashes should affect eyes, bathe immediately with copious quantities of clean water and then immediately seek medical advice.
See Safety Data Sheet for further information.