Showing 10–15 of 15 results
-
Epomast Bedding Grout
Read More +Epoxy Resin for High Performance Repair & Filling
Epomast Epoxy Grout is a three pack, pourable resin with excellent chemical and weather resistance and a very high mechanical strength.
It consists of a combination of formulated resins and specially graded fillers which produce a high performing, free-flowing resin based grout for filling and repairing gap widths between 5 – 40mm.
Typically it is used for precision grouting of machine bases, crane-rails, high speed turbines, drop forges, and other operating equipment subject to heavy dynamic loading. Pre-weighed components make Epomast Bedding Grout easy to mix and apply.
Size (available in) - 26Kg
Coverage Yields 12.5 litres of mixed grout -
Epomast Crack Seal
Read More +Epoxy Resin Sealer for Concrete Crack Repair
Epocrack Seal is a two pack solvent free epoxy repair resin and has been formulated as an extremely low viscositymsystem for gravity feeding or pressure injecting into finem cracks, voids and fissures in concrete.
The low viscosity allows the system to fully penetrate and thoroughly wet out the surfaces.
Epocrack Seal has a long pot life to assist penetration and provide long usable work time.
Repaired cracks are completely sealed against water ingress, applications include repair of concrete beams, columns, slabs and walls etc.
Size (available in) - 1Kg
Coverage 5m2 per litre Certified - CE
-
Epomast Fastpatch
Read More +Epoxy Resin for Rapid Repairs to Concrete and Masonry Surfaces
Epomast Fastpatch is a high strength, trowel applied, two component Epoxy resin for rapid and permanent repairs to concrete and masonry surfaces. Epomast Fastpatch is a blend of Epoxy resin and graded aggregate.
The mixed material is applied to a suitably prepared surface, and quickly cures to form a durable, high strength, abrasion and chemical and weather resistant compound, with negligible shrinkage, Fastpatch is targeted for repairs to spalled or damaged concrete, chemical bunds, bedding pre-cast concrete beams, nosings on expansion joints and for floor repairs.
It is supplied as easy to use pre-weighed components and a small range of colours are available too for more accurate appearance matching.
Size (available in) - 5Kg
- 10Kg
Coverage 5kg pack yield 2.5 litres of material -
Epomast Mortar
Read More +Epoxy Resin Based Repair Mortar
A cementitious powder compound blended with an epoxy resin to create a high strength, high chemical resistant, waterproof, low slump repair mortar.
Epomast Mortar has been developed to produce a repair mortar that has excellent abrasion resistance and durability, has virtually no shrinkage and offers excellent adhesion to most building surfaces, whether they be on the horizontal, vertical or even inverted.
Typical applications include bedding in of fixing bolts and dowels, bridge bearing pads and repair and resurfacing of stairs.
Size (available in) - 25Kg
Coverage 2 kg will fill approximately 1m2 by 1mm deep Certified - CE
-
High-Flow Grout
Read More +Pourable Mortar for High Performance Construction Fixings
High Flow Construction Grout is a non-shrink, high strength cementitious grout which has been specifically designed for easy pouring into and under stanchion plates, machine base plates, parapet rails, for supporting bridge bearings and for filling ducts in post tensioned and pre-stressed structures. It can be used for grouting sections up to 100mm thick.
High Flow Construction Grout is chloride free, and has excellent mechanical properties, chemical resistance and achieves a very high ultimate strength. Its high fluidity means it can be applied by pouring or pumping.
Size (available in) - 20Kg
Coverage n/a -
Resomast Mortar
Read More +Polyester Resin Compound
Resomast Mortar provides the ideal solution in numerous applications involving concrete and masonry repairs, jointing, filling and grouting where rapidly developed high strengths are required.
Resomast Mortar consists of two components, a liquid Resin and Hardener which is an activated filler so it bonds tenaciously to all structural surfaces.
In Resomast Mortar the material can be mixed with a reduced amount of activated filler so as to wet-out the surfaces to be bonded.
Packaging includes proportioning cups and an outer plastic container which can be used as a mixing vessel.
Size (available in) - 25Kg
Coverage 2kg will fill approximately 1m2 by 1mm deep Certified - CE
