Applied to the surface of freshly laid concrete, SAFECURE STANDARD physically ’locks’ in moisture ollowing full hydration of the cement, thus ollowing the concrete to fully cure. This can be achieved by covering the surface of the concrete with a very thin temporary membrane that prevents moisture in the concrete from leaving the surface. Benefits – reduces surface shrinkage and cracking, more durable hard wearing surface and prevention of dusting. SAFECURE STANDARD is also available in a fugitive dye tinted form to assist visual indication during application – SAFECURE STANDARD T

SAFECURE STANDARD is spray applied to the surface of newly placed concrete. The concrete should be free from surface water and the nozzle of the spray should be held approx. 400-450 mm from the concrete surface and passed back and forth to ensure complete coverage. The pump pressure should be maintained at a level producing a fine spray.
Touch Dry Time: 1 to 4 hours dependent upon temperature and wind

Apply the selected grade by spray at a rate of approximately 4-6 m2 per litre, taking care to ensure complete coverage. Immediately after use the spraying equipment should be thoroughly washed out with clean water.

Keep containers sealed. Store in dry conditions, at room temperature and away from direct heat. Protect from frost. When stored correctly in unopened container, stability is 1 year. Stir or mix thoroughly if stored for more than 21 days.

Storage stability is 1 year in sealed containers.

SAFECURE STANDARD is manufactured by Adomost Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department

During application avoid contact with eyes and skin. In the event of eye contact irrigate immediately with copious quantities of water and then seek medical advice. In the event of skin contact, wash with soap and water.
See separate Safety Data Sheet for further information.