SAFECURE SEALER is a composed of a high performance acrylic polymer that when applied to a freshly laid concrete surface will dry to a clear film for curing, sealing and dustproofing concrete.
Safecure Sealer is suitable for use over new and old concrete and performs well on both interior and exterior concrete.

Surface Preparation – The concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent adhesion of the SAFECURE SEALER.
Mixing – SAFECURE SEALER requires no pre-blending and should be used directly from the container.
Application – Apply at a uniform coverage by spray or roller application. Product may be sprayed with a hand held “pump-up” sprayer or with an airless industrial sprayer. If roller applied, use a short 8-10mm nap sleeve.
Curing – For the best cure of freshly placed concrete, apply SAFECURE SEALER as soon as possible after finishing operations and/or immediately after the disappearance of the “sheen” of surface moisture.
Sealing -When sealing old concrete, remove contaminants and stains such as waxes, grease and oil with strong soaps or caustics rather than acids. The surface must be clean and dampened with water prior to application, however, any standing water should be removed.
Apply SAFECURE SEALER at recommended coverage rates. If a second coat is desired, apply within 2-4 hours of the previous coat.
Sprayer Cleaning – Immediately after spraying, clean line and nozzle thoroughly with water.

Curing and Sealing New Concrete: First Coat 4-6 m2/litre Second coat: 7-10 m2/litre
Sealing and Dustproofing Old Concrete: First Coat 6-9 m2/litre Second coat: 9-11 m2/litre
*Coverage rates assume hard trowelled floors. Coverage will vary from the above rates depending on surface porosity and texture.
AVOID EXCESSIVE BUILD-UP. THICKER APPLICATIONS MAY LEAD TO DISCOLORATION AND IMPROPER SEALER PERFORMANCE.

Keep containers sealed. Store in dry conditions at room temperature and away from direct heat. Protect from frost. When stored correctly in unopened container storage stability is 1 year. Stir or mix thoroughly if stored for more than 21 days.

1 year in unopened containers

SAFECURE SEALER is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturer’s instructions. For specific advice regarding any aspect of this product, please consult our Technical Department

Prolonged physical contact should be avoided, where contact with skin occurs, the material should be removed with soap and water. If splashes affect eyes, they should be bathed immediately with copious quantities of clean water and if discomfort persists, medical attention should be sought without delay.
See Safety Data Sheet for further information.