ADOCLEAN PATIO & PATH is a blend of dilute acids developed for the removal of stains, grime, rust, algae and limescale from a wide range of paving surfaces.

Mix Ratio:

General use – 2 parts ADOCLEAN PATIO & PATH to 1 part water. Severe staining – undiluted
Limestone, terrazzo, other sensitive surfaces -1 part ADOCLEAN PATIO & PATH to 3 parts water or weaker.
Handling:
ADOCLEAN PATIO & PATH is an acid based cleaner and precautions against accidental contact should be taken.
Protective gloves and safety glasses are recommended. Avoid contact with skin and eyes.
Clothing may be damaged by prolonged contact. If exposed, remove and rinse thoroughly in water. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
Keep out of the reach of children.
Application:
Brush area to be cleaned well to remove dust, loose dirt and other material that would absorb ADOCLEAN PATIO & PATH unnecessarily.
Thoroughly saturate the area with water. Apply the ADOCLEAN PATIO & PATH diluted as recommended to an inconspicuous area as a test to check the strength is not too high. If action is satisfactory apply generally using brush or spray. Take care not to allow spray onto other surfaces, cars etc. Leave for 1 hour then brush with a stiff brush. Rinse with plenty of clean water and allow to dry. Stubborn deposits may require repeated application of ADOCLEAN PATIO & PATH
When used on pigmented surfaces some colour loss may occur.
Cleaning:
After use rinse all tools with water.

The ADOCLEAN PATIO & PATH container should be sealed after use to prevent evaporation. ADOCLEAN PATIO & PATH corrodes most metals including stainless steel and certain GRP depending upon the resin. Store in rubber lined steel, PVC, polythene, glass or PTFE. Store small containers away from reactive materials.

Practically unlimited in sealed containers.

ADOCLEAN PATIO & PATH is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product, please consult our Technical Department

Eyes: Immediately flood eyes with lots of water while lifting the eyelids. Continue to rinse and get immediate medical attention,
Skin: Immediately wash with water, preferably under a shower, removing contaminated clothing while washing. Get medical attention if blistering occurs.
Inhalation: Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. When breathing is diffi¬cult, properly trained personnel may assist affected person by administering 100 % oxygen. Get prompt medical attention.
Ingestion: Do not induce vomiting. Get medical attention immediately. Wash out mouth with water. Give plenty of water to drink. Refer to separate ADOCLEAN PATIO & PATH Safety Data Sheet.