Ado SafeClean

SKU: ADO-SAFECLEAN

Concrete Remover for Plant and Tools

Adosafe Clean was developed to replace traditional highly corrosive, strong mineral acids to facilitate the safe and non-hazardous cleaning and removal of dry hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding the surface.

  • Description
  • Additional information
  • Enquiry form

Description

Datasheet details

Date of issue: 01/02/2025
Tech Data Sheet No.: 490
Revision No.: v2

Download Adosafe Clean Data Sheet 2025
Request Safety Sheet
Concrete Remover for Plant and Tools

ADOSAFECLEAN is a new product developed to replace traditional highly corrosive, strong mineral acids to facilitate the safe and non-hazardous cleaning and removal of dry hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding the surface

Advantages

• Highly Efficient at Penetrating & Loosening Concrete
• Readily Removes Cement & Tar Deposits
• Effective at Removing Efflorescence, Rust and Limescale
• Non-Corrosive on Metals & Coatings
• Interior & Exterior Use

• Powerful Cleaner & Degreaser with No surface Damage

• Suitable for use on Stone, Tiles and other Porous Substrates

• Low VOC and >90% Biodegradable in 7 days
• Low Odour & Non-Fuming Contains No Phosphoric or Hydrochloric acids

• Safe and Non-Hazardous

• Can be applied to glass, rubber and painted surfaces without alteration

Application

Use as supplied and do NOT dilute. Recommend testing on a small hidden portion of the substrate before applying Shake the product well before use
Apply liberally to the area for treatment. Allow to react for 5-30 minutes (time required depends on the thickness of the deposits being removed). Rinse the entire substrate with a high pressure washer once the material deposits have softened. Otherwise brush off using a thick bristle broom and then rinse with water from a hosepipe whist brushing at the same time.
Do NOT allow the product to dry prior to rinsing.
Application Tools: Apply with a low pressure hand spray unit, a roller or a brush.
Cleaning Application Equipment: Tools should be cleaned with water immediately after use
Recommendations:
For best results it is essential that ADOSAFE CLEAN is used when the temperature of the substrate is between 5 and 30°C.
Do NOT apply in the rain or in very hot weather
Do NOT dilute or mix with another product noticeably bleach
Prevention:
To prevent future soiling it is recommended to protect the surface with a protection treatment of Adomast DEACTIVATOR

Coverage

Approx 5-8 m2 litre – these are for guidance only

Storage

Store in a dry place at a temperature between 5 and 30°C

Shelf Life

Practically unlimited in sealed containers.

Specification

ADOSAFECLEAN is manufactured by Adomast Manufacturing Ltd and shall be applied strictly in accordance with the manufacturers instructions. For specific advice regarding any aspect of this product please consult our Technical Department

Health and Safety

Breathing Protection – no breathing protection equipment required under normal use conditions with suitable ventilation
Hand Protection – Wear rubber gloves
Skin Protection – No skin protection or special clothing is recommended under normal application conditions.
Eye Wear Protection – wear protective goggles
In case of ingestion: Do not induce vomiting. Contact a doctor
See Safety Data Sheet for further information.

Additional information

Size (available in)

5l, 20l, 25l, 205l, IBC

Coverage

n/a

Certified

Eco, Safe

    Name (required)*

    Company

    Email (required)*

    Telephone (required)*

    Subject (required)*

    Message