Adomast has an excellent reputation in supplying high performance cementitious repair mortars. These mortars are polymer reinforced to impart high strength, low shrinkage characteristics.
The use of ultra-fine cement bestows excellent chemical and water resistance and reduces surface cracking. These products are for general construction repair or the filling of tie holes.
We also offer more technically performing repair products, based on epoxy and polyester resins, where the ultimate strength, water and chemical resistance of the repaired area is greater than it was originally. These products are supplied pre-weighed to allow straightforward mixing and easier application.
Adoplug is a polymer modiﬁed, ﬁbre reinforced, ultra ﬁne cementitious repair mortar designed speciﬁcally for plugging tie holes. It’s been designed to impart high strength, low shrinkage and cracking characteristics along with excellent chemical and weather resistance. When mixed with water it forms a cohesive, easy to apply compound which hardens to a strongly bonded watertight plug, forming an effective seal.Available in: 8kg 25kg Certified: SAFE CE Coverage: 2 kg will fill approximately 1m2 by 1mm deep
An ultra-fine cementitious, polymer reinforced repair mortar designed for general concrete repair work. It imparts excellent adhesion with minimum shrinkage and offers high resistance to the passage of water. The mortar sets within minutes and develops compressive strengths within hours in excess of fully cured concrete. Adopatch is available in grey and white colours so they can be blended to match most shades of concrete.Available in: 8kg 25kg Certified: SAFE CE Coverage: 2 kg will fill approximately 1m2 by 1mm deep
A cementitious powder compound blended with an epoxy resin to create a high strength, highly chemical resistant, waterproof, low slump repair mortar that has excellent abrasion resistance and durability, has virtually no shrinkage and offers excellent adhesion to most building surfaces, whether they be on the horizontal, vertical or even inverted. Typical applications include bedding in of ﬁxing bolts and dowels, bridge bearing pads and repair and resurfacing of stairs.Available in: 25kg Certified: CE Coverage: 2kg will fill approximately 1m2 by 1mm deep
Epotac is a low viscosity two pack epoxy resin adhesive, possessing extremely high mechanical strengths, excellent resistance to a wide range of chemicals and high bonding strength to most building surfaces. It has built in flexibility which enables it to accommodate normal thermal movement in concrete without loss of adhesion. Applications include a primer system for screed coatings, chemical resistant coatings.Available in: 1kg 5kg Certified: CE Coverage: 5m2 per kg
Epocrack Seal is a low viscosity two pack solvent free epoxy repair resin for gravity feeding or pressure injecting into ﬁne cracks, voids and ﬁssures in concrete. The low viscosity allows the system to fully penetrate and thoroughly wet out the surfaces. Epocrack Seal has a long pot life to assist application and provide long work time. Repaired cracks are completely sealed against water ingress, applications include repair of concrete beams, columns, slabs and walls etc.Available in: 1kg Certified: CE Coverage: 5m2 per litre
Resomast Mortar provides the ideal solution in numerous applications involving concrete and masonry repairs, jointing, ﬁlling and grouting where rapidly developed high strengths are required. Resomast Mortar consists of two components, a liquid Resin and Hardener which is an activated ﬁller so it bonds tenaciously to all structural surfaces.Available in: 25kg Certified: CE Coverage: 2kg will fill approximately 1m2 by 1mm deep
A very fine, polymer modified, low shrinkage repair mortar for the filling of surface blowholes and small, fine surface defects in precast concrete. Can repair imperfections less than 5mm deep. Polymer modification reduces risks of cracking and can be used on fair faced concrete Single component - Easy to mix and apply.Available in: 8g 25g Coverage: n/a
An extremely high strength and chemical resistant epoxy resin based bedding mortar. Developed for use for bedding machine bases, stanchion bases and man-hole frames. It is also suitable for grouting pre-stressing tendon anchorages and for fixing bolts and dowels. The ultimate compressive strength is around 90N/m² and has good flow characteristics and has excellent adhesion to most sound building surfaces.Available in: 26kg Coverage: Yields 12.5 litres of mixed grout
Hi Flow Grout has been specifically developed to provide a high strength fluid grout for pouring into and under stanchion plates, machine base plates, parapet rails and for supporting bridge bearings etc. The ultimate compressive strength is around 65N/mm² and can be used for grouting sections up to 100mm thick. Hi Flow grout is shrinkage compensated and complaint with DoT highways Agency Spec for Bedding Mortars.Available in: 8kg 25kg Coverage: n/a
Adomast’s concrete Primer A is a high solids, low viscosity acrylic polymer solution developed for improving the adhesion of subsequently applied repair mortars, renders or screeds. It penetrates into the porous concrete surface to maximise its adhesion. It is non toxic and easy to apply. It also will help reduce suction from porous concrete – prevents rapid drying of applied material.Available in: 5l 20l 25l 205l IBC Certified: SAFE Coverage: 3-5m2 per litre (once diluted with water)
Epomast Pastpatch is a rapid curing, high strength 2 component Epoxy resin repair mortar. Suitable for repairs to concrete and masonry surfaces. The cured repair section will have high durability and impart excellent chemicals resistance. High bond strength to most porous surfaces and no primer is required. Ultimate compressive strength is in excess of 75N/mm² Cures in 6 hours to allow full traffic access.Available in: 5kg 10kg Coverage: 5kg pack yield 2.5 litres of material
When you see this symbol the product shown is...
Water Regulations Advisory Scheme Approved