Adomast supplies compounds for combining into the concrete formulation at the mixing stage which accelerate the initial setting time and strength, or help improve the mixing and application of concrete for difficult or awkward pours.
We produce water reducing compounds that help enable the casting and speed the setting of concrete at low temperatures, or provide safer and delay free casting over the winter months.
Adomast offers additives to incorporate microscopic air bubbles in a controlled manner into the concrete, significantly improving the resistance of the concrete to surface cracking due to ice and frost. We also offer products that can improve the water resistance of concrete, allowing it to withstand extremely high water pressure.
A non-chloride, non-corrosive water based solution for speeding up the initial set time for cast concrete. The cement hydration process is accelerated by its incorporation alongide the reduction of added water which increases the early-age strength of the concrete. Adoflow ACF works effectively in lower temperatures so can also be used to provide safer winter concreting without delays.Available in: 5l 20l 25l 205l IBC Certified: CE Coverage: 1L per 100kg of Portland cement
A water reducing & concrete plasticising agent that imparts extremely high workability when added to a concrete mix. This permits signiﬁcant reduction in water content of normal workable concrete therefore producing higher early and ultimate strengths. It also enables the concrete to achieve high compaction with minimal tamping and its increased flow assists with difﬁcult pours.Available in: 5l 20l 25l 205l IBC Coverage: 1L per 100kg of Portland cement
Adoflow S is a standard set plasticiser which can achieve up to 25% reduction in added water content for a given slump with the resultant reduction in water/cement ratio providing increased strengths. It will aid workability without an increase in water/cement ratio. Adoflow S imparts easier and speedier placing and compaction of the concrete with reduced shrinkage and minimal cracking.Available in: 5l 20l 25l 205l IBC Coverage: 0.2L per 100kg of Portland cement
Adoprufe is a concentrated solution of waterprooﬁng chemicals. When added to a concrete mix it ﬁrstly reacts to improve wetting properties, ensures uniform dispersion & full hydration of all cement particles. Secondly it reacts chemically to deposit in all the pores and capillaries an insoluble water repellent metallic stearate. The resulting concrete is not only more dense and stronger but is also waterproof to withstand extremely high water pressures.Available in: 5l 20l 25l 205l IBC Coverage: See data sheet
When added to a cement mortar mix Adoplas produces microscopic, disconnected air bubbles uniformly throughout the mix imparting many beneﬁts. The mix spreads more easily and hangs together better. It retains water to improve bedding-in and adhesion. Its frost resistance is greatly increased. It requires less mixing water. Resistance to rain penetration is increased. Finishing properties are improved. Efflorescence is considerably reduced.Available in: 5l 20l 25l 205l IBC Coverage: 100-250ml per 50Kg cement
Adoflow Winteraid is a chloride-free accelerating admixture with plasticising properties. It is ideal for use when low temperatures require an accelerated set and strength gain of the mortar or concrete & permits earlier release of formwork & provides safer winter concreting without delays by improving workability and enabling reduction in water content.Available in: 5l 20l 25l 205l IBC Coverage: 1250 ml to 50Kg of Portland Cement
Adoair is a designed to impart the deliberate and controlled entrainment of air into concrete in the form of disconnected, uniformly dispersed microscopic air bubbles. It helps increase the workability with lower water/cement ratio. Adoair offers increased resistance to passage of water through hardened concrete and produces frost resistant concrete.Available in: 5l 20l 25l 205l IBC Certified: SAFE Coverage: See data sheet
Adoair PL is designed to impart the deliberate and controlled entrainment of microscopic air bubbles air into concrete. Adoair PL also contains water reducing chemicals which aid the plasticising properties. It helps improve the surface & cast detail, surface wearing properties and helps reduce breakages on concrete block formation. The micro bubbles help produce frost resistant concrete.Available in: 5l 20l 25l 205l IBC Certified: SAFE Coverage: 50-150ml per 50kg of Portland Cement
Adoflow R is a additive which will slow down the hydration of cement in regular concrete which allows for longer times between mixing and placing – this can be important for difficult or complex pours. It also helps reduce the formation of cold joints between pours. It also helps reduce the peak temperature resulting from the hydration process which helps minimise surface cracking.Available in: 5l 20l 25l 205l IBC Certified: ECO SAFE Coverage: 0.8-1.0 litre per 50 kg cement
Adogout is an expanding grout in powdered from which when added to cement based concrete expands with the hydration water and helps counteract normal settling and shrinkage and leaves a slight overall expansion. This ensures a permanent and high bond to all contact surfaces.Available in: 250g Coverage: 250g pack will mix with 50 Kg cement
When you see this symbol the product shown is...
Water Regulations Advisory Scheme Approved