
ADOBOND PVA PVA Latex, Cement Admixture & Multi-Purpose Adhesive
A highly concentrated, viscous emulsion based on polyvinyl acetate that dries completely colourless. Complies with BS 5270.
For bonding plasterboard, acoustic board, wood and most tiles.
Adhesive admixture for Portland cement mortars and plaster.
Dilute for use as a sealer or sizing mix.
Packaging: 210 litre, 25 litre and 5 litre.
ADOBOND SBR SBR Latex, Cement Admixture & Adhesive
High solids content Styrene Butadiene Rubber latex emulsion.
Water resistant bonding agent and admixture for cementitious mortars, screeds, etc.
Produces adhesives and grout mixes with increased freeze/thaw resistance.
Packaging: 210 litre, 25 litre and 5 litre.
EPOBONDWater-Based Epoxy Resin Adhesive
Solvent free, low viscosity epoxy resin adhesive.
Two-pack system ideal for structural bonding of fresh concrete.
For bonding of epoxy screeds and other non-cementitious materials use EPOTAC.
Coverage: 2-4m² per Kg (Depending upon surface finish).
Packaging: 3.3Kg pack.
EPOTACEpoxy Resin Adhesive
Two-pack, epoxy resin based, low viscosity system.
Primer adhesive for bonding epoxy resin mortars and screeds.
Primer adhesive for EPOSCREED and EPOMAST MORTAR GP
Coverage: 3-5m² per Kg (Depending upon surface finish).
Packaging: 6Kg, 2.4Kg and 1Kg packs.
![]()
AQUABAR Expanding Hydrophilic Waterstop
For construction joints in concrete: joints in new construction, joints between old and new construction, pipe joints, tunnel linings.
WRAS Approved for use in potable water schemes.
Packaging: 20mm x 10mm x 5m (7 or 15 rolls per carton) and 20mm x 5mm x 10m (15 rolls per carton).
AQUABAR MASTIC Expanding Hydrophilic Mastic
For construction joints in concrete: joints in new construction, joints between old and new construction, pipe joints, tunnel linings.
WRAS Approved for use in potable water schemes.
Packaging: 6 x 380ml cartridges to a box.
![]()
ADOSHIELDConcrete Plant & Formwork Coating
Blend of corrosion inhibiting agents and petroleum distillates that displaces water and forms a well bonded waxy, flexible coating.
Inhibits corrosion of aluminium and steel surfaces.
Eases removal of concrete build up. Decreases refettling times.
Packaging: 210 litre, 25 litre and 5 litre.
ADOSHIELD PREMIUM Concrete Plant & Formwork Protector
Displaces water and leaves behind a dry, flexible, well-bonded, waxy protective coating.
Packaging: 210 litre and 25 litre.
ADOSOLVE Degreaser for Plant & Surfaces
Oil and grease remover for floors, plant and equipment.
Assists in the removal of oil stains from concrete and asphalt.
Non-flammable.
Packaging: 25 litre and 5 litre.
DEACTIVATOR
Blend of fatty acid deactivators in a mineral oil base used to prevent concrete build up on plant.
Excellent rust prevention characteristics.
Dilute for economy.
Packaging: 210 litre and 25 litres.
DEGREASER
Oil and grease remover for floors, plant and equipment.
Assists in the removal of oil stains from concrete and asphalt.
Non-flammable.
Packaging: 210 litre and 25 litres.
SCAFCLEAN Penetrating Cleaner for Scaffold Fittings
Blend of solvents and oils that penetrates frees and protects steel and alloy scaffold fittings.
Can be used on other deep threaded equipment.
Inhibits corrosion of aluminium and steel surfaces.
Packaging: 210 litre, 25 litre and 5 litre.
![]()
ADOBRITE Hard Surface Cleaner
Concentrated solution for use in pressure washers, power scrubbers and hand systems for the removal of oil, grease, sugars, traffic film and salt build up in many situations.
Packaging: 25 litre and 5 litre.
ADOWASH Sprayers Cleaner
Cleaner for sprayers used with ADOCURE Standard or Super, ADOCURE SEALER etc.
High efficiency solvent for cleaning and prolonging the life of sprayers used for the application of resin based curing agents.
Packaging: 25 litre and 5 litre.
![]()
Industrial pressure sprayers for application of release agents and curing compounds etc.
Metal: 9 litre working capacity.
Plastic: 7 litre working capacity.