ADOAIR

Concrete Air Entraining Agent

Produces air entrained concrete for roads, runways, etc., as specified in DoT Specification for Highway Works, Clause 1001.

Increases frost resistance and durability.

Reduces segregation in pumped concrete.

Mix: 20-60ml per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

ADOAIR PL

Concrete Air Entraining and Plasticising Agent

Mainly used for precast concrete where superior finish to cast surfaces is required.

Mix: 50-150ml per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

ADOFLOW-S

Standard Set Plasticiser

Water reducing, plasticising admixture. Increases workability without increasing water/cement ratio.

Increases strength without loss of workability.

Maintains specified strength with lower cement content.

Mix: 100-1400ml per 50Kg of Portland cement.

Packaging: 210 litre and 25 litre.

ADOFLOW-A

Accelerated Set Plasticiser

Accelerates the setting and hardening of the concrete and increases early strength development to allow greater reuse of moulds.

Mix: 850-1700ml per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

Back to top

ADOFLOW-ACF

Accelerated Chloride-Free Plasticiser

Accelerates the initial and final set of the concrete to give faster strength development, as for ADOFLOW-A, but may be used where reinforcement is present.

Permits winter concreting to continue.

Mix: 1.25 litres per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

ADOFLOW-R

Retarded Set Plasticiser

Similar characteristics and benefits as standard set plasticiser but reduces the rate of hydration of cement, to retard initial and final set.

Extends time available between mixing and placing.

Assists in avoiding cold joints between pours.

Mix: 70-150ml per 50Kg of Portland cement.

Packaging: 210 litre and 25 litre.

ADOFLOW-WINTERAID

Low Temperature Plasticiser

Ideal for use when low temperatures require an accelerated set and strength gain of the mortar or concrete.

Chloride free.

Mix: 1.25 litres per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

Back to top

ADOFLOW-EXTRA

Super Plasticiser for Concrete and Mortar

Used for flowing concrete. High range water reduction for high strength concrete.

Enables concrete to achieve high compaction with minimal or no vibration or tamping.

Mix: 0.5-1.5 litres per 100Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

Back to top

ADOGROUT

Plasticising Expanding Grout Admixture

Powder admixture for addition to Portland cement mixes.

Iron and chloride free.

Production of non-shrink, high strength grouts and mortars on site. Used in pumping or gravity fed grouts.

Mix: One 200g packet per 50Kg of Portland cement in grouts and mortars,
double addition for concrete.

Packaging: 20 x 200g packets. 22Kg bulk (=110pkts.)

Back to top

ADOPLAS

Plasticising Air Entrainer for Mortar

Workability aid for bricklaying mortars and renders. Produces bricklaying mortars that are fattier, more cohesive and easier to work.

Reduces water/cement ratio in renders.

Increases resistance to frost damage and rain penetration.

Mix: 100-125ml per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

Back to top

ADOPRUFE

Concrete and Mortar Integral Waterproofer

Waterproofing admixture that deposits an insoluble water repellent metallic stearate in the pores of the concrete or mortar.

Reduces permeability and absorption of concrete.

Increases resistance to attack from aggressive water.

Decreases efflorescence.

Mix: 500ml per 50Kg of Portland cement.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

Back to top