ADOFLOOR EPOXY

Epoxy Resin-Based Primer

Water based, low viscosity epoxy resin adhesive. Two-pack system ideal for structural bonding of toppings.

Yield: 6m² per Kg (Depending upon surface finish).

Packaging: 8.25Kg and 3.3Kg packs..

EPOBOND

Water-Based Epoxy Resin Adhesive

Solvent free, low viscosity epoxy resin adhesive. Two-pack system ideal for structural bonding of fresh concrete.

For bonding of epoxy screeds and other non-cementitious materials use EPOTAC

Yield: 15m² when used neat and 20m² when diluted.

Packaging: 3.3Kg pack.

EPO-CRACKSEAL

Epoxy Resin Sealer for Concrete Crack Repair

Two-pack, low viscosity, free-flowing system especially formulated for gravity feeding or pressure injecting into fine cracks and fissures in concrete.

Yield: 1 litre per Kg.

Packaging: 10Kg and 2Kg packs.

Back to top

EPO-FLORSEAL

Epoxy Resin-Based Sealer

Two-pack, water dispersible epoxy resin-based system for use as a surface sealer. It will impregnate to strengthen the surface, protect it from chemical spillage and act as a barrier against damp.

Yield: 35m² per coat, per pack.

Packaging: 3.3Kg pack.

EPOMAST BEDDING GROUT

Epoxy Resin-Based Flowable Grout

Two-pack, high-density material, with good flow characteristics.

When cured it possesses extremely high mechanical strengths, adheres tenaciously to most sound building surfaces and is waterproof and resistant to a wide range of chemicals.

Yield: 0.615 litres per Kg.

Packaging: 30Kg and 12Kg pack.

EPOPITCH

Epoxy/Pitch Waterproofing & Protective Coating

Two-pack epoxy resin and pitch-based system which forms a tough, flexible, impermeable and well bonded membrane.

Suitable for DPM sandwich course, tanking of concrete structures and waterproofing bridge decks. Due to lingering odour, not recommended for use in confined areas.

Yield: 2-4m² per Kg.

Packaging: 5.4Kg and 2.7Kg packs.

Back to top

EPOMAST MORTAR GP

Epoxy Resin-Based Mortar

Three-pack general purpose trowelling mortar with the advantage that one does not have to mix the whole pack for smaller jobs.

It has excellent low-slump and feather edging properties and is suitable for horizontal and vertical application.

Yield: 0.525 litres per Kg.

Packaging: 25Kg and 12Kg packs.

EPOMAST PIN GROUT CARTRIDGE

Rapid Curing Grout

Rapid curing ‘one shot’ solvent-free epoxy grout that is mixed and placed in a single action.

Provides a tough, chemical resistant and cost-effective anchor fixing.

Packaging: 6 x 380ml cartridges to a carton.

Back to top

EPOMAST PIN GROUT RAPID

Rapid Setting, Free Flowing Grout

Three-pack Epoxy resin-Based, high density grout with free-flowing characteristics.

Specially developed to give rapid setting and high early strengths even in wet conditions.

Particularly suited to setting of anchor bolts, dowels and starter bars.

Yield: 0.6 litres per Kg.

Packaging: 11Kg and 5.5Kg packs.

EPOMAST THIXOBOND

Epoxy Resin-Based Adhesive Paste

Two-pack, general purpose gap filling adhesive paste for bonding damp or dry substrates.

Provides a high strength structural bond with virtually nil shrinkage.

Yield: 0.55 litres per Kg.

Packaging: 12Kg and 2Kg packs.

EPOMAST THIXOTROPIC FILLER

A blend of selected fine fillers that can be added to EPOMAST epoxy resins to produce a chosen workability.

Packaging: 12Kg and 4Kg bags.

Back to top

EPO-REBOND

Epoxy Resin Adhesive for Re-bonding Toppings

Two-pack, extremely low viscosity resin system especially formulated for gravity feeding into the cavity formed between a de-bonded topping and the base slab.

Yield: 1 litre per Kg.

Packaging: 10Kg and 2Kg packs.

EPOSCREED

Epoxy Resin-Based Screed

Three-pack trowelling mortar with excellent low-sump and feather edging properties.

Developed to produce high strength floors which are impact and abrasion resistant.

Yield: 0.51 litres per Kg.

Packaging: 27Kg pack.

EPOTAC

Epoxy Resin Adhesive

Two pack, epoxy resin based, low viscosity system. Primer adhesive for bonding epoxy resin mortars and screeds.

Primer adhesive for EPOSCREED and EPOMAST MORTAR GP.

Yield: 3-5m² per Kg (Depending upon surface texture and porosity).

Packaging: 6Kg, 2.4Kg and 1Kg.

Back to top

RESOMAST Mortar

A general purpose, variable consistency mortar for repairs to damaged concrete, masonry faces and many other applications.

Two-component, liquid resin and hardener.

Yield: 0.52 litres per Kg.

Packaging: 30Kg and 6Kg Packs.

RESOMAST Putty

A light thixotropic paste for thin joint fixings to horizontal, vertical and inverted surfaces, bonding brick slips and heavy tiles, jointing concrete pipe spigots, filling locating slots in fixing brackets.

Two-component, liquid resin and hardener.

Yield: 0.6 litres per Kg.

Packaging: 25Kg and 5Kg packs.

RESOMAST Thixobond

A heavy bonding paste for securing brick slips, jointing concrete pipe spigots or bedding coping stones.

Two-component, liquid resin and hardener.

Yield: 0.56 litres per Kg.

Packaging: 25Kg and 5Kg packs.

Back to top

RESOMAST Bedding

Flowable mortar for grouting and bedding machine and stanchion base plates, bearing pads etc, where rapid strength development is required.

Two-component, liquid resin and hardener.

Yield: 0.53 litres per Kg.

Packaging: 25Kg and 5Kg packs.

RESOMAST Pin Grout FF

A free-flowing grout for anchoring bolts, dowels and starter bars into horizontal plane concrete, rock and masonry.

Two-component, liquid resin and hardener.

Yield: 0.54 litres per Kg.

Packaging: 25Kg and 5Kg packs.

RESOMAST Pin Grout TH

A thixotropic low-slump grout for anchoring bolts, dowels and starter bars into vertical and sloping plane concrete, rock and masonry.

Two-component, liquid resin and hardener.

Yield: 0.55 litres per Kg.

Packaging: 25Kg and 5Kg packs.

Back to top

RESOMAST Manhole Leveller

Developed for the resetting of manhole frames and other street ironwork in accordance with the recommendations of the Design Manual for Roads and Bridges HD 27/94,Vol 7 Sec.2.

Two-component, liquid resin and hardener.

Yield: 0.52 litres per Kg.

Packaging: 25Kg pack.

RESOMAST Pin Grout Cartridge

Rapid curing ‘one shot’ two part chemical anchor. Based on polyester resin, it is mixed and placed in a single action. Provides a tough, chemical resistant and cost-effective anchor fixing.

Packaging: 6 x 380ml cartridges to a carton.

RESOMAST Pin Grout SF Cartridge

Rapid curing ‘one shot’ two part chemical anchor. Based on styrene-free polyester resin, it is mixed and placed in a single action. Provides a tough, chemical resistant and cost-effective anchor fixing.

Packaging: 6 x 380ml cartridges to a carton.

Back to top

RESOKLENS

Cleaning Solvent

A specially formulated solvent for cleaning resin products from tools and equipment before the resin has hardened. Also suitable for removing any residual release agent from formwork.

Packaging: 25 litre, 5 litre and 1 litre.

Back to top