CEMROK EASI-FLOW EXCEL

(D.o.T. Highway Agency spec. 2601 compliant). Very high strength fluid grout suitable for stanchion plates, machine base plates, etc.

Yield: 14.7 litres per 25Kg.

Packaging: 25Kg bags.

CEMROK EASI-FLOW GA

(D.o.T. Highway Agency spec. 2601 compliant). A high fluidity grout designed for base plate grouting and anchoring bolts, posts, etc.

Yield: 16 litres per 25Kg.

Packaging: 25Kg bags.

Back to top

TARMAC TUF-BASE

A unique free-flowing, protein free self-smoothing industrial flooring underlayment system which has been specifically designed as an underlayment for Tarmac Tuf-Top and provides an economic means of raising and smoothing industrial floors.

The product is suitable for application thicknesses from 7mm to 60mm.

Yield: 1m² at 10mm thickness requires 17Kg of dry powder.

Packaging: 25Kg bags.

TARMAC TUF-TOP

A unique free flowing, protein free self-smoothing industrial flooring system which is ideal where heavy industrial traffic is to be utilised and for warehouse racking aisles. Suitable for use as the wearing surface or can receive resin coatings.

Yield: 1m² at 10mm thickness requires 17Kg of dry powder.

Packaging: 25Kg bags.

CEMROK CONCRETE PRIMER A

An acrylic polymer in a water base, which is designed to give maximum penetration into existing substrate in order to enhance adhesion of cementitious based materials.

Yield: 1m2 requires 0.15 litres of diluted primer.

Packaging: 25 litre, 10 litre and 5 litre containers.

Back to top

GM GROUT RANGE

A range of 11 pre-blended cementitious grouts for use in applications such as tunnelling, structural, stabilisation, piling and void filling. Manufactured using Portland cement and selected fillers with good pumpable qualities when mixed with water.

Packaging: 20Kg and 25Kg bags.

Back to top

LIMELITE HERITAGE GROUT 1-5

A low strength (1-5 mpa) lime-based grout for use in dry conditions. For general void filling where low strengths and the absence of Portland cement hydrates is desirable. Hydraulic lime is used as the key binder.

Yield: 1.8m³ per tonne.

Packaging: 25Kg bags.

LIMELITE HERITAGE GROUT 7

A medium strength lime-based grout for use in dry conditions.

For general void filling where medium strength and the absence of Portland cement hydrates is desirable.

Hydraulic lime is used as the key binder.

Yield: 0.83m³ per tonne.

Packaging: 25Kg bags.

LIMELITE HERITAGE MORTAR 1

A lime-based, low strength pointing mortar, for the pointing of masonry or brickwork mortar joints by mechanical application, where the fabric of the structure is considered delicate.

Yield: 0.57m³ per tonne.

Packaging: 25Kg bags.

LIMELITE HERITAGE MORTAR 4

A lime-based, low strength pointing mortar, for the pointing of masonry or brickwork mortar joints by hand or mechanical application.

Yield: 0.56m³ per tonne.

Packaging: 25Kg bags.

Back to top

ROADMASTER RAPID PLUS

High Early Strength Bedding Mortar

(D.o.T. Highway Agency spec. HD27/04 compliant). A rapid set mortar which can be opened to traffic after approximately 60 minutes under ambient conditions (18-20oC).

Yield: 12.5 litres per 25Kg.

Packaging: 25Kg bags.

ROADMASTER ULTRA PLUS

High Early Strength Bedding Mortar

(D.o.T. Highway Agency spec. HD27/04 compliant). A rapid setting general purpose mortar which can be opened to traffic after approximately 30 minutes in summer and 45 minutes in winter.

Yield: 11.9 litres per 25Kg.

Packaging: 25Kg bags.

Back to top

ADOPATCH

Rapid Set Repair Compound

Premixed, ready-to-use, in grey or white. Mix with water to produce an adhesive mortar suitable for patch repairs to concrete.

Two grades may be blended to improve colour match.

Yield: 1Kg fills approx. 0.5 litres.

Packaging: 25Kg, 16Kg and 8Kg tubs. 25Kg bags.

FASTPATCH

Repair Cements

Polymer modified repair cement.

Shrinkage compensated and rapid setting capability.

Can be colour matched and feather edged.

WRAS Approved for use in potable water schemes.

Yield: 0.52 litres per Kg.

Packaging: 8Kg and 25Kg tubs.

FASTPLUG

Structural Grade Repair Cement

Rapid repair system for levelling, patching water retaining structures or pipes, plugging voids and repairs of damaged screeds.

WRAS Approved for use in potable water schemes.

Yield: 0.52 litres per Kg.

Packaging: 25Kg tubs.

Back to top

FILL ‘N’ RUB

Aesthetic Blemish Repair

Blend of powders to provide options for aesthetic blemish repair and surface imperfections. Slurrified consistency.

Packaging: 8Kg and 25Kg tubs.

CEMROK FC

A single component, polymer-modified fairing coat designed for vertical levelling of concrete walls at thicknesses from1mm to 6mm.

Ideal preparation for the application of compatible protective chemical coatings.

Yield: 15.75 litres per 25Kg.

Packaging: 25Kg bags.

CEMROK HB

A cementitious low density, high build, shrinkage compensated patch repair mortar incorporating 3mm fibres.

Yield: 14.5 litres per 16Kg.

Packaging: 16Kg bags.

Back to top

PPM RANGE

Ready-to-use, pre-blended dry powder requiring addition of water to produce a readily pumped mortar with good placing qualities.

A choice of 16 mortars covering application in dry conditions and special requirements such as wet/submerged, overhead work and narrow joints.

Yield: 0.58m³ per tonne of dry powder.

Packaging: 25Kg bags.

COLOURED PPM RANGE

Ready-to-use, pre-blended pressure pointing mortar available in eleven standard colours - each one carefully chosen to complement natural stone and brick tones predominating throughout the UK.

Yield: 0.58m³ per tonne of dry powder.

Packaging: 25Kg bags.

Back to top

TARMAC HIGH PERFORMANCE RENDER

Standard (White)

High performance cementitious-based, single coat render mainly designed for application by mechanical spraying.

Can be used for exterior or interior applications on concrete, bricks and blockwork.

Yield: 13.3 litres per bag.

Packaging: 25Kg bags.

LIMELITE RENOVATING PLASTER

(Agrément certified)

A lightweight cementitious plaster which has been developed to control dampness passing through plastered walls.

It can also be applied shortly after insertion of a new damp-proof course system.

Yield: 3-3.5m² per 25Kg at 11mm thickness.

Packaging: 25Kg bags.

TARMAC HIGH-IMPACT FINISHING
PLASTER

A hard, durable finishing plaster designed for use over Limelite backing coats as well as traditional gypsum plasters and sand : cement mixes. (Not suitable for application on plasterboards).

Yield: 8.75-10m² per 25Kg at 2-3mm thickness.

Packaging: 25Kg bags.

Back to top

WHITEWALL HIGH IMPACT BACKING PLASTER

Combines with Tarmac High Impact Finishing Plaster to provide a white, hard surface unparalleled in its resistance to impact.

Yield: 2.5m² per 25Kg at 10mm thickness.

Packaging: 25Kg bags.

WHITEWALL ONE COAT PLASTER

An anhydrite based plaster with a hard white, durable surface achieved in a single coat application.

Yield: 2.5m² per 25Kg at 10mm thickness.

Packaging: 25Kg bags

Back to top

ADOPLUG

Polymer modified, shrinkage compensated premix. Fills holes to give watertight plug.

WRAS Approved for use in potable water schemes.

Packaging: 8 litre, 4 litre and 1 litre packs.

FASTPLUG

Rapid repair system for patching water retaining structures or pipes, plugging voids and repairs of damaged screeds.

WRAS Approved for use in potable water schemes.

Yield: 0.52 litres per Kg.

Packaging: 25Kg tubs.

TIEPLUG

Polymer modified, shrinkage compensated Tie hole filler. Rapid setting and bonding characteristics for improved impermeability.

WRAS Approved for use in potable water schemes.

Yield: 0.52 litres per Kg.

Packaging: 8Kg tubs.

Back to top