Biodegradable:

NATUROL CR 2

Biodegradable Release Agent (BCA Category 5)

A readily biodegradable chemical release agent specially formulated to give easy release from pre-cast moulds or formwork and provide a high quality surface finish to concrete.

Offers cost-effective coverage and low odour.

Coverage: 65-80m² per litre.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

NATUROL CR 3

Biodegradable Release Agent (BCA Category 5)

Specifically formulated to give easy release of thermoplastic mould liners and MDO formwork, it provides a high quality finish to concrete whilst minimizing any risks ofaccidental environmental contamination.

Coverage: 30-50m² per litre.

Packaging: 210 litre, 25 litre and 5 litre (box of 4).

EXTRACON

Concrete Chemical Release Agent (BCA Category 5)

One of the original and most accepted release agents.

Formulated for use on most types of formwork to give the optimum release and finish inprecast and site applications.

Coverage: 25-60m² per litre.

Packaging: 210 litre and 25 litre.

EXTRACON DS

Concrete Chemical Release Agent (BCA Category 5)

Non-hazardous release agent specifically formulated to give easy release of formwork and high quality surface finishes on ABS and Thermoplastic moulds.

WRAS Approved for use in potable water schemes.

Coverage: 25-60m² per litre.

Packaging: 210 litre and 25 litre.

EXTRACON SC

Concrete Chemical Release Agent (BCA Category 5)

Specifically formulated to give easy release of formwork and quality of concrete finish.

Especially suitable for use with metal forms whilst inhibiting corrosion.

Coverage: 25-60m² per litre.

Packaging: 210 litre and 25 litre.

EXTRACON XS

Concrete Chemical Release Agent (BCA Category 5)

Specifically formulated to give easy release of formwork and quality of concrete finish.

Quick drying release agent for use on overlaid ply and soffit formwork.

WRAS Approved for use in potable water schemes.

Coverage: 25-60m² per litre.

Packaging: 210 litre and 25 litre.

PLASTRIP S

Concrete Chemical Release Agent (BCA Category 5)

Specifically formulated to give easy release of plastic and thermoplastic mould linersproviding high quality finish to concrete.

Coverage: 30-50m² per litre.

Packaging: 210 litre and 25 litre.

EXTRASTRIKE 402 S

Concrete Mould Oil (BCA Category 2)

Specially blended, highly versatile, quality neat oil with surfactant.

Ideal for use on metal, timber and other formwork materials and coatings.

Coverage: 25-40m² per litre.

Packaging: 210 litre and 25 litre.

EXTRASTRIKE QRS

Quick Release Agent (BCA Category 2)

Unique system of blended surfactants in a low viscosity mineral oil.

Formulated to give quick, efficient release for semi-dry concrete casting systems.

Allows rapid production in automated production facilities.

Coverage: 30-60m² per litre.

Packaging: 210 litre and 25 litre.

EXTRASTRIKE S

Concrete Mould Emulsion (BCA Category 2)

Ready-to-use quality cream emulsion.

Water-in-oil formulation for use on absorbent timber.

Brush or spray consistency available.

Coverage: 10-20m² per litre.

Packaging: 210 litre and 25 litre.

EXTRAPOL CW 60

Wax-Based Release Agent

A blend of selected waxes and release agents.

Specifically formulated to provide an extremely effective release system for vertically formedconcrete pipes cast on steel pallet rings.

Coverage: 10-15m² per Kg.

Packaging: 20Kg keg.

EXTRAPOL DWF 30

Dewatering & Rust Preventative

Specially formulated product based on a blend of preservative oils and additives, providing excellent surface de-watering characteristics whilst simultaneously providing an economicaltemporary protective coating to ferrous and non-ferrous metal moulds or forms.

Coverage: 30-60 m² per litre.

Packaging: 210 litre and 25 litre.

EXTRAPOL NH 1

Brick Oil

Tailor-made product for the Brick Industry.

A blend of hydrocarbon carrier and additives designed to give positive release of Brick/Tilepallets.

Coverage: 30-64 m² per litre.

Packaging: 210 litre and 25 litre.

EXTRAPOL RP 2 & RP 3

Rust Preventative & Concrete Release System

Thixotropic, film-forming and dewatering coating, which can be applied by dipping, spray or brush.

The product is resistant to sag, run-off and flow.

Dewatering characteristics make it ideal for large steel moulds, etc, where protection from the weather is difficult during application.

Coverage: 20-25 m² per litre.

Packaging: 210 litre and 25 litre.